SET of 20 Network Transceiver Modules 9 Cisco 4 10Gtek 5 Finisar 2 Fortinet

$99.99 Buy It Now or Best Offer
free,30-Day Returns

Seller Store nu2you_auctions
(1831) 100%,

Location: Beaumont, California
Ships to: US,
Item: 326194110052

All returns accepted:ReturnsNotAccepted
Several:Several
MPN:SFP-10G-SR
Unit Quantity:20

PLEASE READ BEFORE BIDDING! You are looking at a set of 20 Optical Transceiver Modules. They are in working condition, some being brand new and the others barely used. They were a lot of the incorrect modules for our office. Photos of actual items that are being shipped. See below for full specs and photos for more details!SET INCLUDES:3x FINISAR FTLX8571D3BNL-E54x 10Gtek AXS85-192-M32x FINISAR FTLF8519P3BNL6x CISCO SFP-10G-SR3x CSICO GLC-SX-MM2x FORTINET FN-TRAN-SX MODEL FTLX8571D3BNL PRODUCT FEATURES • Hot-pluggable SFP+ footprint • Supports 9.95 to 10.5 Gb/s bit rates • Power dissipation < 1W • RoHS-6 compliant (lead-free) • Extended temperature range 0°C to 85°C • Single 3.3Vpower supply • Maximum link length of 300m on 2000 MHZ-km MMF • Uncooled 850nm VCSEL laser • Receiver limiting electrical interface • Duplex LC connector • Built-in digital diagnostic functions APPLICATIONS • 10GBASE-SR/SW 10G Ethernet • 1200-Mx-SN-I 10G Fibre Channel Finisar’s FTLX8571D3BNL Extended Temperature 10Gb/s SFP+ transceivers are designed for use in 10-Gigabit Ethernet and 10-Gigabit Fibre Channel links over multimode fiber. They are compliant with SFF-84311, SFF-84322, IEEE 802.3ae 10GBASE-SR/SW3 and 10G Fibre Channel 1200-Mx-SN-I4. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-84725. The FTLX8571D3BCL is a “limiting module”, i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer’s recommended settings for interoperability with an SFP+ limiting module. The transceiver is RoHS compliant and lead free per Directive 2002/95/EC6, and Finisar Application Note AN20387. MODEL AXS85-192-M3SFP+ 10Gb/s, 10GBase-SR, MMF, 850nm 300MThe AXS85-192-M3 850nm VCESL 10Gigabit Transceiver is designed to transmit and receive serial optical data links up from8.5 Gb/s to 10.51875 data rate over multimode fiber.The Transceiver is compliant with FC-PI-4,10G FC,IEEE 802.3ae,SFF-8432,and applicable portions of SFF-8431.The transmitter converts serial CML electrical data into serial optical data.An open collector compatible Transmit Disable (Tx_Dis) is provided.When TX_DIS is asserted High,Transmitter is turned off.The receiver converts serial optical data into serial CML electrical data.An open collector compatible Loss of Signal is provided.The RX_LOS signal indicates insufficient optical power for reliable signal reception at the receiver.Digital diagnostics functions are available via a 2-wire serial interface,as specified in SFF-8472. MODEL FTLF8519P3BNL Duplex SFP 2.67Gbps 500m MMF DDM 850nm FTLF8519P3BNL Features • Finisar 1000BASE-SX Ethernet SFP • Up-to 500m over MMF @ 2.67Gbps • 850nm Duplex SFP Transceiver •-10°C - 85°C Operating Case Temperature • SFF-8724 Digital optical monitoring • Hot-swappable for SFP LC ports • Finisar Standard 1 Year Warranty • Metal enclosure, for lower EMI • SFP MSA / IEEE Std 802.3 • Finisar FTLF8519P3BNL is RoHS compliant Applications • 1000BASE-SX Ethernet • 1.063/2.125 Gb Fibre Channel Description The Finisar FTLF8519P3BNL 1000BASE-SX Ethernet transceiver is a Duplex SFP transceiver for optical communications, rated for distances up to 500m and a maximum bandwidth of 2.67Gbps. The FTLF8519P3BNL transceiver operates at 850nm wavelength. 2Gb/s 850nm FC-20 to 85C SFP Transceiver. Finisar FTLF8519P3xNL Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). MODEL SFP-10G-SRThe Cisco 10GBASE-SR Module supports a link length of 26m on standard Fiber Distributed Data Interface (FDDI)-grade Multimode Fiber (MMF). Using 2000MHz*km MMF (OM3), up to 300m link lengths are possible. Using 4700MHz*km MMF (OM4), up to 400m link lengths are possible. The Cisco® 10GBASE SFP+ modules (Figure 1) give you a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications.Features and benefits Cisco SFP+ modules offer the following features and benefits. ● Industry’s smallest 10G form factor for greatest density per chassis ● Hot-swappable input/output device that plugs into an Ethernet SFP+ port of a Cisco switch (no need to power down if installing or replacing) ● Supports “pay-as-you-populate” model for investment protection and ease of technology migration ● Digital optical monitoring capability for strong diagnostic capabilities ● Optical interoperability with 10GBASE XENPAK, 10GBASE X2, and 10GBASE XFP interfaces on the same link ● Cisco quality Identification (ID) feature enables a Cisco platform to identify whether the module is certified and tested by Cisco MODEL GLC-SX-MM Duplex SFP 1Gbps 500m MMF 850nm GLC-SX-MM Features • Cisco 1000BASE-SX Ethernet SFP • Up-to 500m over MMF @ 1Gbps • 850nm Duplex SFP Transceiver • 0°C - 70°C Operating Case Temperature • No Digital optical monitoring capability • Hot-swappable for SFP LC ports • Cisco 90 day standard warranty • Cisco SFP can be covered by SMARTnet • SFP MSA / IEEE Std 802.3 • Cisco GLC-SX-MM is RoHS compliant Applications • Gigabit Ethernet Description The Cisco GLC-SX-MM 1000BASE-SX Ethernet transceiver is a Duplex SFP transceiver for optical communications, rated for distances up to 500m and a maximum bandwidth of 1Gbps. The GLC-SX-MM transceiver operates at 850nm wavelength. The 1000BASE-SX SFP, compatible with the IEEE 802.3z 1000BASE-SX standard, operates on legacy 50 nm multimode fiber links up to 550 m and on 62.5 μm Fiber Distributed Data Interface (FDDI)grade multimode fibers up to 220 m. It can support up to 1km over laser-optimized 50 μm multimode fiber cable. MODEL FN-TRAN-SX FEEL FREE TO CONTACT ME IF YOU HAVE ANY QUESTIONS.Buyer pays actual shipping cost.Thank you for looking! Have an amazing day!High bidder MUST confirm by sending complete mailing information within 72 hours from close of sale. Payment is DUE and MUST be received within 7 days from close of sale. In the event you fail to honor your winning bid, you will be subject to eBay's nonpaying bidder policies. This Item is sold AS-IS, with no warranty expressed or implied. No refunds or exchanges.

Frequently Asked Questions About SET of 20 Network Transceiver Modules 9 Cisco 4 10Gtek 5 Finisar 2 Fortinet in My Website

www.malmobeerweek.se is the best online shopping platform where you can buy SET of 20 Network Transceiver Modules 9 Cisco 4 10Gtek 5 Finisar 2 Fortinet from renowned brand(s). www.malmobeerweek.se delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling SET of 20 Network Transceiver Modules 9 Cisco 4 10Gtek 5 Finisar 2 Fortinet on www.malmobeerweek.se?