RCP RC Motors Castle 2028 Series 800kv-1100kv-1700kv EXTREME Motors

$274.95 Buy It Now or Best Offer
free,30-Day Returns

Seller Store radio_control_power
(3599) 99.5%,

Location: Kingman, Arizona
Ships to: US,
Item: 126457147607

All returns accepted:ReturnsNotAccepted
Castle Creations:Castle Creations
Type:Brushless
MPN:060-0064-00, 060-0087-00, 060-0103-00
Compatible Scale:1:4,1:5,1:6,1:8,1:10

Welcome to our Ebay store We specialize in RC Power Products such asESC’s, motors, and wiring accessories. Along with QS8 Connectors & Accessories! We sell the best selection ofesc mount plates available! Check out our mountsthat fitTraxxas X Maxx, XRT, & Maxx Trucks! Fit Arrma Kraton/Outcast6s & 8s Trucks! And try our 8 volt 28 cfm4028Super High Speed FansNO MORE NEEDfor 3s or 4sextra batteries inyour car to runthe cooling fans!! Just plug into the receiver forhigh speed fans! WE COMBINE SHIPPING! 1 Reduced shipping chargewhen checking out withmultiple items! We are Authorized Dealers forCastle Creations& Hobbywing Listed item Specifics: 2028 SizeCastle Creations Motors BRAND NEWIN SEALED PACKAGE All 8mm Bullet ConnectorsOn Motor Wires We are Authorized Castle CreationsReSellers!! Choose:2028 800kv2028 1100kv2028 1700kv(Extreme) We include 300RC Zip TiesIn Green5 1/2″ LongBetter FlexibiltyEasier to use We offer all these motorswith esc’s in combosReady to RunConnectors Attachedin separate listings 2028 800kv Technical SpecsInput Voltage Range:12S MAXKv:800Max. RPM:45,000Size:Length: 4.4″ (112.7mm)Diameter: 2.2″ (56.3mm)Weight (w/wires):44 oz./1.25kgShaft Size:Length: 30mmDiameter: 8mmMounting Hole Specifications:4mm @ 30mmCooling Fan:Use the RCP Xtreme Cool 56mm motor bracket with (2) 4010 or preferrably if you have the space use our 4028 8v SUPER FANS!!Connectors:8.0mm male connectors, 250mm sensor wire.Items Needed for Operation:XLX2 esc which RCP offeres RTR in separate listingsProduct Use Statements:Monitor motor temperatures closely; overheating a motor will cause permanent damage to the magnets. Never exceed 180° F on the the motor or ESC.Do not use mounting screws that extend more than 5mm into the front of the motor. Using too long of a screw can result in damage to the motor’s windings and will not be covered by the warranty.Application Guidelines:Perfect upgrade for any 1:5 scale RC hobby vehicles (including gas to electric conversions) weighing up to 30 lbs for 2WD and 25 lbs for 4WDRecommended ESC(s):XLX2Max. Recommended Vehicle Weight:4WD vehicles weighing less than 25lbs.2WD vehicles weighing less than 30lbs.Tech Notes:Running modes: Sensorless and SensoredThe 2028-800KV is a water resistant design. The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. We recommend applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. 2028 1100kv Technical SpecsInput Voltage Range:10S MAXKv:1100Max. RPM:45,000Size:Length: 4.4″ (112.7mm)Diameter: 2.2″ (56.3mm)Weight (w/wires):44 oz./1.25kgShaft Size:Length: 30mmDiameter: 0.315″ (8mm)Mounting Hole Specifications:4mm @ 30mmCooling Fan:Use the RCP Xtreme Cool 56mm motor bracket with (2) 4010 or preferrably if you have the space use our 4028 8v SUPER FANS!!Connectors:8.0mm male connectors, 250mm sensor wire.Items Needed for Operation:XLX2 esc which RCP offeres RTR in separate listings Product Use Statements:Monitor motor temperatures closely; overheating a motor will cause permanent damage to the magnets. Never exceed 180° F on the the motor or ESC.Do not use mounting screws that extend more than 5mm into the front of the motor. Using too long of a screw can result in damage to the motor’s windings and will not be covered by the warranty.Application Guidelines:The 2028-1100KV is a water resistant design. The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. We recommend applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. 2028 EXTREME1700kv Technical SpecsInput Voltage Range:8S MAXKv:1700Max. RPM:60,000Size:Length: 4.4″ (112.7mm)Diameter: 2.2″ (56.3mm)Weight (w/wires):44.9 oz./1.25kgShaft Size:Length: 30mmDiameter: 0.315″ (8mm)Mounting Hole Specifications:4mm @ 30mmCooling Fan:Use the RCP Xtreme Cool 56mm motor bracket with (2) 4010 or preferrably if you have the space use our 4028 8v SUPER FANS!! Connectors:8.0mm male connectors, 250mm sensor wire.Items Needed for Operation:XLX2 esc which RCP offeres RTR in separate listingsProduct Use Statements:This is an extremely powerful motor designed for advanced and experienced users only. Below are suggestions for increasing your likelihood of success but it is not guaranteed.Start with very conservative gearing (small pinion/large spur).Check your data logs, temperatures and setup closely after each run to ensure you are not stressing components.This motor is intended for single passes only; allow time between runs for the ESC, batteries and motor to cool down to ambient temperatures.This motor can pull very high amperages. Make sure your batteries, connectors and soldering are capable of handling the loads. Inadequate power can cause poor performance and damage the batteries and/or ESC.Do NOT free rev the motor with no load, particularly when running 6s or higher. The RPM output of the motor is much higher with no load as the kv and battery voltages do not drop.Set ESC timing to Lowest (0). This motor will pull considerably more amperage as you increase timing. This does not necessarily equate to more speed as it puts more strain on the batteries and causes the voltage to sag. Less is more sometimes.Do not exceed 33.6v when using this motor.Be sure your pinion and motor bullets are secure before and after each runRecommended ESC(s):XLX2 esc which RCP offeres RTR in separate listingsRunning Modes:SmartSense™ (with Castle Sensor capable ESC), Sensored and an ultra-efficient Sensorless mode.Tech Notes:Water resistant design. The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. We recommend applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. We Combine on Shipping Hit ”Save This Seller”We are adding cool new itemsin our store for RC! Thank You for your business!

Frequently Asked Questions About RCP RC Motors Castle 2028 Series 800kv-1100kv-1700kv EXTREME Motors in My Website

www.malmobeerweek.se is the best online shopping platform where you can buy RCP RC Motors Castle 2028 Series 800kv-1100kv-1700kv EXTREME Motors from renowned brand(s). www.malmobeerweek.se delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling RCP RC Motors Castle 2028 Series 800kv-1100kv-1700kv EXTREME Motors on www.malmobeerweek.se?