$250.0 Buy It Now or Best Offer
free,30-Day Returns
Seller Store 7houses
(177) 100.0%,
Location: Brunswick, Ohio
Ships to: US,
Item: 274400858719
All returns accepted:ReturnsNotAccepted
Hafler:Hafler
Type:Power Amplifier
Country/Region of Manufacture:United States
* Please contact me BEFORE BUYING so I can determine your exact needs. This is NOT a repair service. Your amp should be in working order as I Do Not stock routine repair parts. * ** This listing is for ”ALL PARTS & INSTALLATION”. ** *** Parts price increases is unfortunately here in 2024. Parts are becoming more difficult to find and in some cases have quadrupled in price. The specific Power Supply Capacitors I have been using have reached their ’end of life’ from the manufacturer. Many Driver Board parts have seen a 100-400% increase because of supply chain shortages and increased tariffs. Even with the increases, you will find that these upgrades are a great value when you consider the increased performance of these upgraded Hafler Amplifiers. *** **** Turn-around time for this set of upgrades, is typically 2 weeks once I begin your project. I do this work part-time and never rush my work as this is very detailed, custom work. I want to make sure that everything sounds just right before sending your amp back to you. As time allows, I contact my buyers as to their position on my list as I move through my projects. The wait may be long, but it is SOOO worth it- just read my testimonials below. **** Because the demand for my upgrades has been growing in popularity, I have 3 projects on my ’Waiting List’. Some of these projects are ’boards only’ which only take me a couple nights to complete. It typically has been taking me 2 weeks to complete each project, so do the math on the wait. I apologize for the long wait. As I move through the list, I send out updates as to your position. When I begin the project in front of yours, I will let you know to ship me your amp so I can begin work on your project. I also will send you regular progress updates with pictures so you can see how things are coming along. If you really want to revitalize your 30+ year old Hafler Amp, but don’t have the technical knowledge to do your own installation or can’t afford the ’high-end boutique’ amplifier upgrade shops, let me professionally do it for you. You will be hard-pressed to find this level of work at a better price. I have been an Engineer in the Broadcast industry for 30+ years and have worked as a Studio Recording Engineer as well. I take great pride in the quality of my work. Being an Audiophile has been a lifelong passion of mine. Having the QUA-CO Audio(now FANTASIA AUDIO) Hafler Polypropylene Capacitor Upgrade Kit installed in your legacy amp will give you the latest capacitor technology . Much has improved over the past 30 years. It will improve sound clarity and really sweeten up the sound of your DH200/220 or DH500. FANTASIA AUDIO’s Kit contains every capacitor used on BOTH CHANNELS OF THE PC-10 OR PC-19 DRIVER BOARDS- (46 in all). I exclusively use Ed’s capacitor upgrade kits. He has assembled kits for just about every Hafler or Dynaco model and knows these amp’s architecture better than anyone. Ed at FANTASIA AUDIO brings a wealth of knowledge from his 20+ years as the Amplifier Project Manager at Dynaco & Hafler. Next to David Hafler himself, you will not find a more knowledgeable Hafler amplifier engineer. I have had nothing but FANTASTIC results using his upgrade kits. Just see what my customers are saying. Here’s some of my recent feedback: Hi Jim,It’s Cam here from Nelson BC , Canada.I have to commend you and Ed’s for your combined work contributing to the rebirth of my DH 200.I am delighted with the outcome and couldn’t be happier!The words that sum up my listening to the rebuilt amp for the first time is simply WOW! I can’t thank you enough for your support to my friend Jim S. who did the install of the boards.It was so worth the wait, the additional power from the upgrade has made my Kef 105.2’s sing to new highs! Many many thanks! Kind regards ,Cam (another happy customer) Hello – my name is Denny. If you’re an audiophile and music lover like me, you’re on a constant quest for better sonics and musical enjoyment. But the cost of high-end audio gear continues to soar, perhaps putting our goals out of budgetary reach. But, there might be another way forward, just as musically satisfying, and well within your budget. Why not refurbish or completely upgrade your existing Hafler amp? Replacing worn out parts components with those made from modern materials or completely upgrading circuit cards with modern designs, can dramatically transform the sound of your Hafler amplifier. And all this can be done in the existing chassis, so you’re not spending money on new metal work or cosmetics that do nothing to improve the sound of your amp. But I was skeptical. Do I really want to ship my amp off to a person completely unknown to me? Would I get it back? Will it get damaged in shipping? Would it take forever and a day for the upgrades to be completed? Would I be happy with the results? With these questions in mind I began looking for upgrade resources on the internet to get answers. Among others I found Jim (7houses) out on eBay. Jim was patient and took the time to explain his upgrade process, detailing exactly how everything would work along the way. He also explained different upgrade options, at different price points, that were available to me. Jim also described the sonic benefits of each upgrade and even made a suggestion for the biggest sonic bang for my buck for my particular Hafler amp. Jim’s been doing these upgrades for years and knows how to coax the best performance from these amps, rivaling just about any new products you can buy today. Jim also sent me detailed instructions on how to pack my amp to prevent any damage during shipping and the approximate time-frame it would take him to perform the upgrade. As a result of these communications I got real comfortable with Jim, decided to move forward with his recommendation and price and shipped my amp off to him. Was it worth it? The answer is a resounding YES. Jim communicated with me during the entire upgrade process, even sending photos along the way with his comments. I got my amp back within the specified time-frame too. Jim’s upgrades not only improved the long-term reliability of myamp but completely transformed its sound in just about every way. These sonic improvements aren’t trivial, and I’m just delighted with the soundof my amp, knowing that Jim saved me hundreds or even thousands of dollars over a new amp. I’d do it again in a heartbeat. Thanks…. Denny Hi, Jim: I’ve been listening to my new QC-600, and I have to say all the reviews I’ve read are right on and then some. My Klipsch Heresy speakers sound different than before the upgrade: bass is deeper, highs and mids more out front, instruments more separated, more air around everything. It’s extraordinary. Great job on the amp, Jim. Ed, your design on the PC boards is fantastic. Very happy with the sound. Truly the finest my music has ever sounded. Jim, your communication while I was waiting for my turn in your queue, while you worked on my amp, and follow-up with photos and documentation chronicling the upgrade were above and beyond my expectations. I feel very lucky to have found you guys on eBay. Jim, I wanted to tell you your work is impeccable and nice to see those skills of yours. Thanks so much for all of your help. When I get customers wanting there Haflers upgraded, your the man and I’ll send them to you.Thanks again,Alan ”Absolutely professional! Perfectionistic! Great communication! Amp sounds great!” ”Excellent service! Jim goes out of his way to be helpful and meet your needs!” ”Had a chance to test out the amp, and it sounds AMAZING! Thank you for all the work. Starting with great communication throughout with progress updates, the attention to detail and letting me know of unforeseen issues with advice on remedies, taking the time to repackage the amp for shipping just because it was in my best interest. And finally, the craftsmanship that went into putting it all together. Initially I was apprehensive about spending the money on an old piece of electronics, but after having had a chance to really listen to the results, it was the best money I’ve spent on audio gear in years!” ”I have not been ignoring you in responding to the work (magic) you performed on my DH-220. I wanted to let it settle in before I wrote back to you. My intent was to use the Hafler as my backup amp to the MC2100. So, along with the Nippon Cap & 35A Rectifier Power supply upgrade, Polypropylene cap upgrade kit, we talked about installing Input Level Pots located in the rear of the top panel so I would have the same ability to balance the speakers as I can with my McIntosh MC2100. The work was flawless and the DH-220 sound’s great. I can honestly say that I cannot tell the difference, side by side, between the MC2100 and the DH-220 now. Instead of a backup amp, it is my first chair. Thank’s again for the great work. My new Hafler will probably out live me. Money well spent. – All the best, Bob H.” ”Thinking my DH-220 was dead, I began shopping for a replacement amp. Nothing I came across would fill the nostalgia flicking on my Hafler provided, and being part of a system passed on by my dad I was inclined to keep it. I knew it needed a repair and had almost given up when I came across 7houses on eBay. I sent an email and received a quick reply and then a phone call. I knew I had found the 220’s only chance and quickly followed Jim’s directions for shipping. He immediately sent pictures and an autopsy report and his suggestions for a repair. Within a couple of weeks the amp was working, together we discussed other potential upgrades and I basically received a NEW Hafler within another few weeks- Completely upgraded, sure to last another 30 years, and most importantly sounding great! I have spent the weeks since receiving the amp listening to most of my vinyl, locked up for hours on end. My wife is happier, the Hafler is back to doing its thing, and I’m tickled silly. It’s beautiful, sounds great and I can’t wait to pass it onto my 7 yr. old in a decade or two, perhaps three. Thanks Jim.”————————————————————————————————————————————————————————– Here’s what you get: Once I receive your amplifier I will give it an initial check and then run some sound through it to make sure it has no unknown issues before I begin. If I find anything unusual, I will contact you and discuss your options. If it passes the initial check, I will remove all the 30+ year old, lesser quality capacitors from both channels and install the all new high quality Polypropylene and Electrolytic Capacitors from your FANTASIA AUDIO kit. I use industry standard, high quality, Kester ”44” 63/37 non-corrosive Rosin Core Solder. As part of the cap upgrade installation, I will adjust your DC Offset and Bias to factory specifications. After 30+ years, and a major component change out, it will require an alignment. I will also clean all input & output connectors. And as a courtesy, I will also make sure you have the correct Speaker Fuses installed. Once completed, I put every amplifier through 2 days of ’in-system’ testing to make sure everything sounds just right. CAPACITOR VALUES OF 680pF AND LESS ARE MURATA 1000 VOLT 5% CONFORMALLY COATED CERAMIC CAPACITORS. ELECTROLYTIC’S ARE NICHICON AUDIO GRADE GOLD OR BETTER. ALL OTHER CAPACITORS ARE XICON, RUBYCON, OR CORNELL-DUBILIER 250 TO 630V 5% OR 10% POLYPROPYLENE’S.FEATURES: • Low dissipation factor• High insulation resistance• High capacitance value stability – longer life• Self-healing properties • Non-inductive NOTE: Most of you STILL have the original, 30+ year old Power Supply Capacitors in your amp. I will verify that your power supply voltages are up to spec, if they are not, I will make the recommendation to get your Power Supply rebuilt with 2 new Nichicon Capacitors and a 35A Rectifier. If your power supply is in decline, you will not get the full sonic benefit of having your Driver boards renewed. If you want the best sound possible out of your vintage amp, don’t ignore the importance of having a solid Power Supply. If you drive your amp to loud levels routinely and your power supply is sagging, you run the risk of also blowing your output MOSFET Transistors which are very expensive($30/pr.) as they all need to be ’matched’ as a set, so you won’t get by replacing just one, but the entire set! I have another listing for Power Supply rebuilds.——————————————————————————————————————————————————————–Shipping: (Please Read Carefully) You MUST make sure that your amplifier is packaged properly as they can weight upwards of 55 lbs.! I HIGHLY suggest having it double boxed. It would be a shame to have it damaged in shipping. I will be using YOUR packaging to return ship your amp once completed. Buyer assumes all responsibility. This listing says ”Free Shipping” because you are only paying to have your amp shipped to and from me. Buyer pays ALL Shipping Costs and will specify shipping method if other than UPS Ground. Estimated UPS Ground shipping cost each way: $30 – $65.00 (cost varies by buyer’s location, weight and method used). Please include a PREPAID UPS GROUND RETURN SHIPPING LABEL in the box along with your amp so that there is no delay in returning your amp to you once completed. —————————————————————————————————————————————————– Want MORE from your amp? See my other Audiophile Upgrade listings. Here’s what you COULD get: If you have a DH-500/220/200 Hafler Amplifier that has become old and tired, but still works and needs some new life breathed into it or you are still searching for true high-end Audiophile quality sound without the high-end price tag, then let me install FANTASIA AUDIO’s Ultimate Audiophile PC-1 upgrade kit to get you to that next level. I have had nothing but FANTASTIC results using their upgrade kits. These upgraded ’QC’ Amplifiers have NEVER sounded better! See my other listings for Installation of the FANTASIA AUDIO PC-1 Driver Board Upgrade Kit or Ultimate High-End Audiophile Upgrades if you really want a major amplifier upgrade. After listening to my first fully upgraded DH-500 I did for a friend who worked many years for several ’high-end’ audio equipment companies, we were BOTH immediately convinced that Ed, the designer at FANTASIA AUDIO had truly designed something really special. Ed spent many years working at Hafler as the Amplifier Project Manager, but his own PC-1 Driver Boards that he designed to work specifically in Hafler amps are a culmination of his years of experience. Your fully upgraded amp will go head-to-head with amps costing several thousand dollars. Find out why the #1 comment from my customers is: ”I’m hearing things I’ve never heard before!” I also offer a Speaker Protection Relay Module (just like in the 500) for the DH-200 & 220 for $120. ————————————————————————————————————————————— Take the time to read my Customer’s Testimonials: Jim, First off I would like to thank you for the efforts you go to in keeping vintage amps like my Hafler 500 (which has become a QC 600) up and not only running but exceeding all expectations. My Hafler was tired and needed some help….man did you ever come through! The little tweaks that you kept my informed of were great, but the fact that you have been through so many of these amps that you know them like the back of your hand really made me feel confident in using your skill for my amp’s upgrade. It is nice that your efforts are not lockstep, but rather if you see an opportunity to improve upon your process, like in my amp’s case using the non-shorting, heavy duty, gold speaker binding posts that you take that opportunity and tweak your process and the customer and amp is better for it. The sound from my amp with the new PC-1 driver boards is as you mentioned……..dead silent on power up and super clean and detailed through my Polk SDA SRS2 speakers. I am really looking forward to the years ahead with this amp……money very well spent. Finally, I was very impressed with the return packaging on my amp……..my packaging effort to send it to you couldn’t hold a candle to how you returned it……….thank you so much Jim and good luck in your endeavors in the future…. Lou Hello Jim. Just got my Hafler. It sounds like never before. Lows have more warmth, highs more crispy and mids have a beautiful presence too. The frequency spectrum is much wider. Great job!Thanks again!Mario Hi Jim, Your work is impeccable. So clean and sanitary looking. I have had a few weeks to listen to the DH500 after the rebuild process. Before I delivered the amp to you, it had a lifeless, almost flat sound. The bass was weak, and the mids/highs were muddy-sounding—typical for a 40-year-old amp, I suppose. The sound now- defined, clear, authoritative bass, very musical is what I would describe it as. If the recording is good, wow! If the recording is less than ideal, it shows. I attribute that to the amp letting all the detail through. I am using a very nice tube pre-amp. The system just sounds incredible. It was worth every penny! I would put this amp up against any Bryston, Krell or McIntosh; it’s that good. What a powerhouse. I don’t always listen to Steely Dan, but when I do so do the neighbors! Best regards, Kurt D. Ristow Jim, Got the amp set up last night. One word: Magnificent! More thoughts to come… Don B. Don B’s follow-up thoughts: I am extremely pleased with the work done. I was hesitant at first because of the price, but then found out what it would cost to replace with a similarly powerful amp of the same quality. I went from hesitancy to no-brainer. The sound quality is like nothing else I’ve heard from ANY system. Visitors to my rec room are blown away by it. Most say the same couple things: 1) That they are hearing subtleties of the music they’ve never heard before, and 2) It sounds like they are in the recording studio, as if the band is right in front of them. Best $1000 I’ve ever spent on my system. Thank you very much. Don B. Music lovers. Champagne ear on a beer budget? Anyone looking to upgrade a legendary David Hafler vintage power amp should strongly consider a Jim Settecase rebuild. (200, 220, 500) High quality improved circuit boards designed by former Hafler amp guru Ed Fantasia. Outstanding build workmanship quite reasonably priced. Jim provided precise progress notes and photos during the rebuild. Post build documentation too. In summation; I sent Jim a glass of tap water. He sent back a bottle of San Pelligrino. Superb sounding amp with effortless power. (Power rating upped from 220 to 280 watts) Highly musical. Brought my already very good system up to outstanding. Chris MorehouseHouston TX Jim, After having plenty of time to do some serious listening I have concluded that there is a dramatic improvement in the sound of my Hafler 500 after the audiophile upgrade. I hear detail like never before. The vocals jump out with such presence I am able to clearly hear the lyrics where before the upgrade on some recordings the vocals would get lost and muddled. I never thought my speakers were capable of producing the sound I am hearing. A perfect example of this are recordings in Dolby Atmos. Prior to the upgrade Dolby Atmos recordings had virtually no difference in sound. I now hear depth, clarity, detail, separation unlike anything I have heard. I have no doubt the investment was well worth it. My experience with the process is not the first time having Jim work on my Hafler 500. About three years ago he did a PCB upgrade and I thought there was no way to improve on the sound until I had the Audiophile upgrade. There is no-one else I would trust to work on my 40+ year old amp. He is a true professional that takes pride in his work. His detailed updates along the process is unusual in today’s world. I highly recommend the upgrade for anyone who would want to make a major improvement in the sound of their system.Stephen G. Hi Jim:Just a note to say that Hafler #2 arrived in perfect condition last week. Thanks for the expert packing to insure safe travels for the return trip. Alway appreciated!I also wanted to say thanks again for all your hard work on both of my Hafler amps. I’ve set one QC-600 up in a dedicated media room and the other in the main livingroom. Both are performing flawlessly and sound awesome paired with my Benchmark DAC3 HGC Ref. DACs. Happy Thanksgiving Jim.Ed Jim, January is on it’s way out the door but my Hafler amp is staying put! It sounds great. I have it driving a pair of Vandersteen 2Ce speakers using a Rotel CD11 Tribute, Everything sounds so good, friends just can’t believe the clean signal, the separations and the sheer quality of the entire system. I have played several types of music ranging from the Acid Rock of my youth to the quieter sounds of wooden guitar music and all sound superb. I have put this amp thru several days of intense listening and I have not heard a flaw in any of the tunes I have played. Separation between instruments has been spot on and each sound as I believe they should. Most importantly the program being played is smooth and not in your face (that’s the Mosfet system at work I believe). This now brings me to a crossroad. Do I go back to collecting vinyl and buy a good turn table or buy a good used reel to reel for extended listening time when socializing? Either way my wife will think I’m nuts!!!Thank you again for doing a wonderful job in restoring this amp. It makes it impossible to NOT listen to the system, it’s a real joy.I really hope you enjoy the great work you do.David L. What an amp!! Music is my first love – listening, playing, and performing. To me, the best quality home stereo equipment reproduces the original signal as accurately and invisibly as possible, i.e. without adding or subtracting anything. A straight piece of wire with gain, as the saying goes. My Hafler sounded excellent before shipping it to you, and sounds stellar after receiving your upgrades. I’m using an Emotiva pre, with the QC-280 driving a pair of 1978 vintage Klipsch Cornwall’s and couldn’t be happier with the sound at all volume levels – warm, punchy, dynamic, detailed, revealing, deeply enjoyable without fatigue.Additionally, your customer service is second to none – the amount of communication and the detail therein along with all the documentation provided, is truly exceptional. It is very clear that you love what you do, which is immediately evident from your level of workmanship. Being the electromechanical systems technician and lifetime nerd that I am, I was obligated to open the case and have a look – inside I observed some of the most perfect wiring and soldering that I have ever seen performed by human hands. Meticulous, careful, patient. I am confident that this now heirloom quality audio component will function flawlessly for at least another 40 years.Lastly, I don’t think there is a power amp out there anywhere close to the price point of the QC-280 that can come within a country mile of its performance. Thank you Jim, I am very pleased with my investment!Jesse Stunning, phenomenal, accurate, precise, I could go on describing the sound!!!! Top notch impeccable build quality. Parts quality spot on . Jim stayed in touch with me every step of the way. Phone, email, text message every method was used. This was an awesome experience all the way around. If you are on the fence about doing this to your amp. I can’t stress enough DO IT !!!! You will be glad you did. Sonic purity !!!! You will hear things that you didn’t before.Capt. Mark L. Hey Jim,Well, I’ve been having a marvelous time with my QC-280, and so have a friend or two. We’ve thrown a variety of speakers at it, both bookshelf and floor-standing, as well as different amps and preamps. I’ve gotten to know its sound pretty well and am convinced of its long-term reliability. So here goes the testimonial I promised. I hope it isn’t too corny as I tend to wax. When referencing you and your service, I just used the name ”Jim”. Here goes…I’m a repeat customer of Jim’s Hafler Amp upgrade service on eBay. So, I think I can speak with some authority on Jim’s overall professionalism, reliability, timeliness, and quality of the upgrades he offers. If you appreciate true high-end sound and can do without the boutique looks and exorbitant prices of today’s new amps, then I urge you to get in touch with Jim on eBay. I’ll explain why.Jim’s first upgrade for me was a complete recap of a Hafler DH-120 that I built from a kit in the mid 1980’s. Along with some new hardware for more solid connections, this upgrade also included a new switch, surge protection and higher value power supply filter capacitors. I was completely stunned at the improvement in smoothness, bass slam and overall musicality Jim brought to this little medium power amplifier.While no circuit mods were performed on my DH-120, the overall improvement in sound quality whetted my appetite for what Jim could do with his ”audiophile upgrades” to Hafler’s higher power amplifiers. So, I patiently waited and watched on eBay for a used DH-220, that was still in working condition, had the cosmetics I was willing to live with and at a price I was willing to pay. I didn’t have to wait long and snagged my 220. I immediately contacted Jim. He went over the upgrade options and prices with me, and I didn’t hesitate to opt for the full audiophile circuit upgrade, speaker protection circuit and the other hardware component upgrades to transform my amp.Jim supplies instructions on how to safely pack your amp for shipment to his location. So, I sent Jim the agreed upon down payment and shipped him my amp with no consternation at all. These upgrades are getting pretty popular, so Jim let me know my place in his working queue and the approximate time it would take to complete the upgrades on my amp. Once that started, Jim provided me with an overall assessment of my stock amp, made a few adjustments to bring it within spec and started the upgrades. He sent me photos each step of the way so I could see exactly what he was doing. He also sent me a link where I could download the new circuit schematic and a description of the new circuit’s operationas well as other useful technical information. My amp was completed within a couple of weeks of Jim starting work on it, tested in Jim’s own listening environment, and promptly shipped back to me.I’ve been listening for a few weeks to the upgraded 220, now called the QC-280, as these upgrades add an additional 20 watts of power to each channel and wanted to provide a few thoughts on its sound. I’m not a professional reviewer, but I’ll use the power of 3 and summarize my thoughts into 3 categories. I’ll call these Slam, Space and Soul.SLAM: Jim advised me beforehand that I might no longer need to use a subwoofer in my listening setup as the QC-280 could provide all the bass power, slam, and testicles that anyone could want. He was so right! I’ve already reassigned my subwoofer to home theater duties. The difference the upgraded 280 makes is actually startling. And that’s not all – bass notes now have quality and texture – something I had not heard before out of my Nola Contender speakers.SPACE: With a good preamp, in my case a Benchmark LA4, the QC-280 will reveal all of the spacial queues that are captured on your recordings or streaming services. Individual instruments are precisely located in space and provide separation from other instruments in that recorded space. The stereo image is 3D with great front to back depth and lateral spread. I think this is a hallmark of the new circuit design and a quality usually only heard in very expensive amps. It really puts the high in high-end and creates a listening experience that you wouldn’t think possible at this price-point.SOUL: Ok, so this is the hardest part to describe in words, but you will certainly know it when you hear it. I like to go to a lot of live performances of Jazz, choral, orchestral, and small ensembles around where I live. This helps keep my ears attuned to what live instruments and voices really sound like. Real, live music has texture, tones, overtones, and ambiances that help make a live musical performance such an emotional experience. We want that in our home music systems too, but it’s hard to obtain. The QC-280 gets you a long way there. You can hear the husky growl and sexiness in Diana Krall’s voice, the sweet and lush string tones of the Vienna Philharmonic, the hall ambiance of Severance Hall and the Cleveland orchestra, the bite of Coltrane’s horn, and all the percussive effects of Fourplay and today’s modern music.Needless to say, I’m completely happy with my upgraded QC-280. It has provided me with much musical value and happiness at a price I never imagined possible. I urge you to contact Jim soon. Jim,I’ve been letting your upgrade of the DH-200 soak into my musical brain for a few weeks now. Wow! I never imagined how profound an improvement it could make in my system! It’s hard to stop listening and yes, I’m rediscovering my music collection all over again!! I’m driving a pair of DefTech BP-10s and it’s handling the 6 ohm nominal very well. Everything sounds so tight, so much more detailed with a good soundstage even for the bipolar speakers. As an acoustic guitar and banjo playing nutter, I’m especially impressed with how “real” acoustic instruments appear…the attack, decay and resonance are amazing. Also, the transients and percussives are so tight! High quality recordings like my re-mastered Miles Davis will lock me in my chair and I can’t stop smiling!! Thanks again for your guidance, your outstanding workmanship and the value you built into this amp!! I’ve got several musical instruments and this amp may be the best one I’ve got! Highly recommend!Dave Jim, So yes, I’ve finally fired up the amp. Been listening for almost 2 hours now…. Wow! Freaking awesome! I am amazed at the details and the transparency! No listening fatigue- just “what’s next”? It’s going to be so cool going through and rediscovering my music collection and certainly a reason to find even more incredible music! I’d say the amp woke up the speakers. We listened to quite a variety of music, from Donald Fagan to Molly Tuttle. The biggest surprise was a group that we like from Canton, NC near where Mindy’s dad is. They’re called ‘Balsam Range’…yeah kinda Blue grassy, but a bit more updated in their approach. All their albums are recorded very well. Oh my god the vocals and harmonies sounded incredible! The guitar, mandolin and fiddle had tactile details and the bass was solid. They were in our living room! I am blown away! My thoughts are this is more than an amp, it’s a musical instrument in and of itself. Thank you! Your work and knowledge are so appreciated. Your gift is the music 🎼 Oh yeah!DaveHi Jim,First, all I can say for now is the results of your efforts are ”Simply Unbelievable”. I have never had my Hafler perform like it is now even when it was new. The clarity and crispness have blown me away. The amp is really fantastic!Thanks, Tom Jim, It’s been around 6 yrs+. since you upgraded my amp. It still sounds absolutely fantastic every time we listen to it. Being an old-time audiophile, I have yet to hear a cleaner, attention to detail and clearer sounding amp. I’ve rep’d Adcom, JBL, Hammond and retailed McIntosh, B&0, NAD, Carver/Phase Linear, & Linn along with several others and chose Hafler for the realistic strong sound it offers (even met David Hafler @ a CES back in the day). Your mods make a difference and I strongly recommend anyone who owns a Hafler Amp to invest in your talents.Good Job & thanks!- lexovetJim,Got my amp back last night and all I can say is WOW!! Stayed up till 3 AM listening to things on tracks that I’ve never heard before. Stereo separation, soundstage and clarity are vastly improved. Thank you so much Jim!MikeMike’s follow-up comments:Hi Jim……..My name is Mike and you did a Hafler DH-500/QC-600 upgrade last year for me….and it is flawless…. I have hundreds of hours on it now and you may use me as a reference anytime……any prospective clients can come to listen to my Lancaster, PA. system anytime. It will be a lifetime relationship with this amp! Jim,The amp sounds terrific, and your electronic workmanship is top-notch!Thank you!Doug A. Hi Jim,I hope all is well with you and your family. Now that I’ve listened to my upgraded Hafler 500, I just wanted to let you know that I’m super happy with it. It’s more than I imagined! The thing that really sets it apart for me is the way it drives my 1.7 Maggie’s. I was previously using a Hafler 220, and while the sound was good, I noticed that some recordings were lacking in bass. With the upgraded 500 driving them, that issue is long gone. The 500 drives them wonderfully, and there is plenty of bass!I will likely send you a Hafler 220 next. 😊 Thank you Jim, I’m very appreciative!!Rick Hi Jim,I unpacked and plugged in the amp today and it does sound fantastic! Incredibly crisp and clear, with easy power.After more listening:I’ve really been enjoying the QC-280. It sounds great with all kinds of music. It’s nuanced and precise playing The Nutcracker (my 2-year-old daughter’s current favorite), with easy separation of instruments and a wide sound stage. It handles the dynamic range very well, with barely any loss of detail in the quiet parts. The controlled power of the guitar riff on Dire Straits’ ”Money for Nothing” was enough for my Infinity CS-3008’s to knock a picture off the wall–with the volume at 1:00. Ella Fitzgerald and Count Basie sound like they’re playing ”Honeysuckle Rose” right in the room with you. I wish I could say more, but I’m more of a music lover than an audiophile. Joe It sounds fantastic! The day my reworked amp arrived, I spent the entire evening listening to a wide variety of music and loved every minute of it – straight out of the box. No fiddling with the controls on my preamp, no acclimating my ears to the sound – just sonic bliss. To describe this upgraded amp as ”musical” falls short. It lends liveliness and presence to songs that I’ve heard a million times previously but had never ‘experienced’ them like this before. I love it! You can listen to music for hours with this amp, without the fatigue that was an a facet of the character of the original DH-220.Its also important that I mention the communication by the seller was top notch every step of the way. I got daily updates via email on the progress of the upgrade and prompt replies to my email queries before, during, and after the sale. If I owned another Hafler amp, I wouldn’t hesitate to upgrade it.-Jon G. If you own a vintage Hafler amplifier do not hesitate to get the full PC1 upgrade Jim is offering. I’ll break this down into two parts. First is the work and Jim himself. At every step of the upgrade Jim kept me informed including photos of my amplifier as he transformed it. Every picture showed me that this man is meticulous and conscientious in the work he does. Craftsmanship is rare these days and Jim is truly a craftsman. Now how does the amplifier sound. Is this hyperbole or the real deal? To remove any variables I kept my audio system the same as it was, the only difference is I connected my new QC280 amplifier Jim built to the pre-out on my NAD C368 BluOs and reconnected my KEF XQ10’s to the new amp leaving my KEF 400b subwoofer on the sub out. My source material was CD’s ripped with Exact Audio Copy and 32/192 kHz streaming through the BluOs. This amplifier was a revelation! The soundstage was massive, both wide and deep and truly holographic in its’ imaging. Dynamics were crisp and instantaneous. I put on Steve Reich’s Music for 18 Musicians and every instrument was clearly defined and organic in timbre. Next up was Miles Davis In a Silent Way. Again, from Miles’s trumpet to Shorter’s sax to DeJohnette’s brush work on drums and cymbals and McLaughlin’s guitar runs all seemed to be in the room with me. I stayed up until dawn going through every genre, classical, jazz, rock and roll, Afro-Pop, and all of it was like I was truly hearing it for the first time. This amplifier upgrade is the best value I have found in a very long time and Jim himself is a gem. I am currently building myself a pair of CSS 1TD speakers and I can’t wait to hook them up to this amazing amp.Yours in the love of music and high fidelity, Jeff Young Jim,I have had a chance to put the amp through a wide range of my musical tastes and can only come to one noticeable difference – EVERYTHING!!!I have been able to listen for a long period of time at a high level without any listening ‘fatigue’. I am hearing things on recordings I have been listening to for may years that I never heard before. Especially subtle differences as a song I’ve known for many years now hearing there is some reverb and delay in the recording I never heard. I can clearly hear the differences in how recordings are produced, some very minimally (clean instruments and vocals) and others that sound ‘over produced‘. My wife who is not an audiophile says everything sounds so much more clear with defined presence. I hear complete silence through the speakers where before I would hear a hum at high levels. I thought my speakers were past their prime and ready to replace, but now its like I’m listening to new speakers. I installed a few more cooling fans in the cabinet that my stereo components are in because before your upgrade the amp fan would usually kick on to the high speed. Now the cabinet temperature is at around 10 -15 º cooler and I have yet to hear the fan go to high, and can’t hear it on low because it is so quiet.I have had this amp for over 40 years and about 10 years ago began looking for someone who could diagnose and replace/upgrade what it needed so I wouldn’t have to part with it. It basically has been idle for that time until I came across your ad on eBay. My only regret is not packing the amp as you suggested by double boxing. I believe I had enough cushioning but another box around it with more insulation would have protected it on the way home. The dent it suffered is hidden by the cabinet, so the fact that it works flawlessly is what I care about. The wait time to send the amp and get it back was well worth it. Your attention to detail and meticulous workmanship is hard to find today. It really shows how much you care and love what you do. You have definitely made a big impact on my love and appreciation for a good sound system. I can’t thank you enough. I would recommend you to anyone looking to upgrade a Hafler amp needing some TLC. P.S. The first album I played was Lyle Lovett ‘Step inside this House‘ double album all the way through. It was a good first test because the album although recorded in 1998 is one of my favorite quality recordings of great musicians and well produced. Turn it up loud for ‘Rolin By’. Another favorite is Dire Straits ‘Brothers in Arms’, I was blown away listening to the remastered recording.Thank you.Stephen Grzeszkiewicz Hi Jim, I hope all is well with you and your family. I just wanted to let you know that I finally finished the PC-1 upgrades to my DH-200. It took a while. I only was able to work on it a few hours here and there. On Tuesday I did the final adjustments. The bias pots only need @ 1.5 turns to get a very steady 225ma. The dc-offset pots only needed a nudge and I got -00.3mv and -00.5mv and called it a day. So now was the time for sound testing. I hooked up the QC-280 to my MC DH-101 (never heard since I got it back from upgrading), added my Gamma 20 Tuner and my 30-year-old Philips cd player. On Saturday my wife, using a 1990s Technics receiver and a 1990s Technics cd player was playing some of her cd’s one being Broadway songs. The speakers were about 5 feet apart, on the floor, and were sounding the best I have ever heard them (this being before I heard Ed’s PC-1 boards). I was very happy with the sound to the point that my wife asked if I wanted to hear one of my cd’s and I responded “no, I am very happy just sitting here and listening to the sound coming out of the speakers”. The sound seemed as if you were in the audience of the show. So, on Tuesday, thru the Philips cd player and the upgraded Hafler, I played the Beatles ‘Love’ discs and Eric Clapton ‘Unplugged’. On Wednesday, I played ‘The Essentials of Billy Joel’. The song “The River of Dreams” was unbelievable. I had to listen a second time the sound was so fantastic. On Thursday, I listened to Steely Dan ‘Aja’, a cd of big band songs, and Brian Seltzer ‘Dirty Boogie’. As you know, the sound is phenomenal. It is more than I ever imagined. It is everything the testimonials say. The guitar strings, piano notes, the drums, the horns, the stand-up bass, the chimes, cymbals, the strings, the back-up singers you never heard before, the singers stretching out the notes, etc. You hear everything. I thought the system I bought 40 years ago was a nice sound. But I think the PC-1 upgrade lets thru twice the sound the original Hafler produced. I could not be happier. – Danny Danny’s ‘Follow-up’ Comments: I just wanted to let you know what I have been experiencing. And I would assume it will be things you have heard many, many times. As you may remember, I have some big, old KLH’s for speakers. These QuaCo / Hafler amps are great. As I have said before, its more than I could have ever imagined. This week I have been listening to it for a couple of hours a night. After an hour and half or so, the amp starts sounding very good. The problem is, it is now getting late and I should be going to bed, but I can’t. Last night about 11:00, The Blues Brothers song, “Sweet Home Chicago” came on. OMG, the musical sound you heard! The soundstage / imaging was great. I just closed my eyes and listened in amazement. I could not go to bed yet, I just had to listen to a few more songs. It was great. A few months ago, I never would have thought that from a 30-year-old CD player I got for $100 and 20-year-old bargain basement speakers for less than $200, that they would produce this kind of sound. I cannot imagine what the sound will be like out of a good pair of speakers. My thought is – once the amp gets about 100 – 125 hours of play time, it will be very close to its ultimate sound. Hopefully, by then my ears will be accustom to the much bigger soundstage and I will be more prepared to audition better speakers so that I can hear what the amp is truly able to give. When the time comes, I will start with the speaker companies you have suggested. In hindsight, I am so happy that in one of your earlier emails you commented that you would gladly just refurbish my DH–200, but if and when I wanted, you could take the amp to a whole new level. And I know it took me awhile to realize that the additional cost was minimal (maybe $100 or so), but I am very glad you made the comment and planted the seed in my head. Thank you so much. – Danny Cisco’s ’follow-up’ comments: This IS an important detail: my super thirsty RTi A9 Polk’s have ALWAYS needed to be bi-amped to really get them to open up and sound full and big—especially on the low end. To wit, I had them wired with an Adcom GFA-555SE for the Bass/low end, and either an Adcom 555SE (special boutique upgrade akin to your QC-600, custom driver board, silver solder matched components, etc., etc.) or a Yaquin 100B Tube amp with VERY expensive and exotic tubes rolled into it for the top end/mids/highs. I alternated with solid state and tubes so that I could use the SS amp for movies and theater and the tubes for music just to help conserve tube lifespan. I have bee driving the whole thing with a Krell Foundation 4k preamp, using their automatic room correction. Anyway, when used in this combination, the amps really light up the Polk’s, and the sound is phenomenal, especially the solid state/tube combo. The speakers easily handle around 200-300 watts RMS, and really need that extra power they get from being bi-amped for the bass to appear at all. With this setup, there is no need for a separate subwoofer—these babies shake the house! Now, on to the most important part: with the QC-600, I get the same level of bass and sound, except clearer, cleaner, wider, more open, faster, more detailed, and if you can believe it—even more powerful—FROM A SINGLE AMP. That’s right—the QC600 effortlessly outperforms two other expensive amplifiers COMBINED—both a pure SS and a tube/SS setup. I was able to A/B every possible combination directly, and I can say with absolute certainty that by the end of my experimenting, I was convinced. I literally pulled all the old amps from my cabinet right then and there and replaced them—PERMANENTLY. The results are just that good. And they’re only getting better as the amp burns in and opens up more and more every day. Thanks once again—I wanted to add this extra bit so you can use it in your ads should you choose. I think it’s important for people like me who are naturally skeptical to understand that if they are even a little hesitant about doing this upgrade—DON’T BE. It is the single best investment I have ever made in my long audio career in terms of sheer value. It’s not an exaggeration or hyperbole of any kind to say that this upgraded amplifier can hold its own against amps priced far higher. So to anyone who may read this: ”JUMP. Make the leap. You.. WILL.. Not.. Regret.. It. Audio Nirvana is closer than you think!” Thanks again Jim, and I WILL be back to use your amazing services again very soon! Sincerely,Cisco OH MY GOODNESS!!Is it working? Is? It? Working? IS IT WORKING?????Never in my life have I heard anything like this! Audio nirvana! My Polk RTi A9’s have always been super thirsty, which is why I bi-amp them—till now it’s been the only way to get decent bass. Their sensitivity is garbage. Well, once I finally had time to hook up the amp, I fired up a test song from one of my favorite playlists. I had only intended to verify the amp was working, but an hour later, I realized that the speakers had disappeared and I had just sat there enjoying songs I’ve heard a hundred times like they were brand new. Expansive soundstage—it was just me and the music.Bass was deep and tight, not boomy or loose in any way, but still powerful and commanding. The mids, my god the mids! They stood out on their own with a clarity and smoothness that was astonishing. The highs were so clean and airy—I had not even a HINT of listening fatigue after the hour session—in fact, I had to tear myself away from the music to get some work done. Another awesome thing was that the music sounded fantastic at all levels—even quiet, it still had powerful presence and compelling clarity.Before I quit though, I did an A-B with my Adcom 555SE (a not inconsequential $1400 amp), and a heavily modded Yaquin tube amp I had nearby. The Adcom had great mids, but nowhere NEAR the commanding presence and incredible bass of the QC600. It sounded shrill, hollow and empty, flat and disappointing. (It actually sounded great, but after the QC…well now I am officially SPOILED!!) The tube amp was nice and warm, but just didn’t have the power that the Polks needed. It too, while sounding really great, was greatly disappointing after hearing the QC600.This amp has been one of the most expensive investments I’ve ever made, because now my other amps are all worthless, hahaha! But seriously, NEVER in all my years of audio have I gotten so much value from my investment. This was worth the wait and the money 100x over. Thank you so, so much for sharing your gift with the world, and with me. I can tell you with absolute certainty that I will be back for more in the future! It was an absolute joy working with you. I will remember in the future also your advice about double-boxing, it was an eye-opener just how close I came to having something bad happen to this absolute treasure!With the quality I see inside this amp, I would expect it to play faithfully for maybe 20-30 years with no problems. I’d love to pass it on to my son someday :)Thank you, Jim. I wish you and yours a wonderful year, filled with happiness, health, laughter, family, smiles, friends, and MUSIC.Sincerely,Cisco Hi Jim: I bought my Hafler in the late 1970’s along with a Luxman tube pre-amp. At the time this was a big step up in affordable quality. Eventually I put my gear in storage, which ended up being for 25 years. I decided to resurrect this equipment last January. I happened upon your eBay offering and after giving you a call, decided to move forward with it. I was expecting maybe marginal improvement in performance but I was looking to at least to have an evaluation and replace any aged parts. During this time I also re-tubed my preamp and cleaned it up in anticipation of the audition of 21st century electronics. Your communication was excellent during this process. You provided very affordable recommendations. Just a note, anybody out there, if Jim makes a recommendation for parts – don’t go cheap. Follow his direction. When I received the amp, I hooked up the Luxman, and I was off to the races. The initial impression was the surfacing of music in the tracks that were never clearly audible before. Separation in stereo was markedly improved. The new N.O.S. stock tubes in the pre-amp brought a sound stage to this amplifier that was nothing short of profound. THIS AMPLIFIER IS MADE FOR TUBES. This prompted me to look in the marketplace for new technology in a tube pre-amp. I settled upon a PrimaLuna Dialogue pre-amp. Outstanding performance and build quality. After rolling some N.O.S. tubes, this turned out to be superior to the Luxman. Now I’m hearing vocal back tracks in Jan and Dean that I never heard before. The Doobie Brothers tracks I thought were out-takes because there is so much more music that I never heard before. Jim’s efforts are one of the great open secrets in audio. This quality in sound is the biggest bargain I’ve run across. Thanks again Jim Hi Jim,I can tell you that the original 500 you reconstructed sounds incredible! (more 3D than my other older one, but with the same perfect frequency balance). In fact, the 3D enhanced 500, due to the increased depth of the sound, provides more space between sounds and instruments. I will have you do the same reconstruction to my other 500 at a later date.Kind Regards,Pierre Hi Jim,I wanted to send you an update on how the Hafler 500 (QC 600) has been performing. It’s been a couple of months since the upgrade and I am really enjoying the amp. The Solstice speakers are moderately efficient so it doesn’t take much form the QC 600 to shake the house. What I have really noticed is the increase in sound stage, the clarity of the individual instruments, especially with Hi-Res sources. Bass response is fast and punchy way different than the Adcom amp I used to own. It has been a blast to listen to my collection of music and hear parts of the recordings that I was not able to discern before. The amp runs super quiet thanks to your work getting the fan to run correctly. I was really impressed with how fast you responded to questions I had and the level of detail to questions and to the repair process itself. I wanted to let you know how pleased I am with the process and the end result. Your attention to detail is tremendous and your fees are really reasonable!Best Wishes,Dave B Hi Jim,Remember me? You did a total rebuild on my DH-500 amp just about a year ago. I happened to be going through my old email drafts & saw one to you that I didn’t send. So I thought I’d contact you & let you know about my amp. It’s still working great! Here’s my old unsent email: ”The Hafler sounds great! I could hear the difference from what it was before & now immediately. The sound is super clear. The highs are much, much better, they probably stand out most but the overall sound is just tremendous! The whole system sounds great!I also definitely noticed the increased power. I am very happy with the way it preforms now. Wow, last night, I listened to it for a couple hrs. When I listened to stereo (just the Hafler) not 7.1 multi-channel, I could especially hear the increased clarity & improvement in sound very easily. I got it last Friday from FedEx. It survived shipment well. Excellent re-packaging by you, thank you! On Sunday, I took apart the body to put the face plate & handles. The quality of your workmanship inside is just awesome! …the pictures you sent me don’t do it justice! Everything you did is very clean & neat.,, very well done. I know quality when I see it! I’m really happy with everything & glad I had you do the work.” Thank you for all the high-quality work & care you put forth on this project for me. It was well worth it & much appreciated! Wishing you the best Jim, take care! Sincerely, Bob Hey Jim, been meaning to send you a line or two with my thoughts about the ”new” DH200/QC280. 😁I’ve been giving it some very serious listening sessions since discovering I’d wired the right speaker out of phase. 😝 In a way I’m glad I messed up, I can be confident I’m listening objectively and not hearing what I want to hear.So what I’m hearing is nothing short of spectacular! The combination of the Hafler and Infinity’s is incredible. As you pointed out these speakers have the reputation of being amp-killers. Paired with an amp that took measures to prevent speaker-killing and I think we have a thing of beauty. The amp has the balls to push the speakers and they have the balls to take all it can dish out. I haven’t come close to pushing either but enjoy the pure, clean power while listening ’comfortably loud’. I have no doubt the sound will be just as pure at ear-splitting levels as well.Like you said, some music is better produced than others and I find myself cringing a tad from time to time, but when you hit a well produced song it is absolutely thrilling. I listen to just the Infinity’s on 2 channel most of the time, but occasionally I’ll kick it into full 9 channel wall of sound and it’s really something.I’m totally happy that I went ahead and had you do the full mod on my amp. It was totally worth every cent not only to have an absolutely top notch power-amp, but the nostalgia factor of having the core of my 30 plus year old hi-fi system back can’t be measured. I don’t think a modern 2 channel amp can come close to the old Hafler’s for the price of this upgrade. This is as close to the warm sound of a tube amp as anybody can possibly hope to come.I look forward all week to my weekend listening sessions.Thanks Jim!Theo Hi Jim, I wanted to give a few impressions after having the amplifier on for over 200 hours. I want to first state that I have mainly used tube amps in my main system (Marantz 8B, Eico HF 81 Sam Kim mod, Dynaco St 70, Dynaco ST 35 power supply upgraded and others). With that said, I have a bias and a love for the midrange, especially vocals and strings, a good and properly working tube amp can bring. My favorite, the ST35 is only 16 or 17 watts, but the EL 84 tube is fast in the transients and has airy highs and a good foundation for bass. I have used my Hafler XL280 in my main system and my 2nd system uses an old NAD 3020 amplifier which had been serviced recently. My impressions will now focus only on the QC-280 with only a few comparisons to the other amps. Associated Equipment: conrad johnson PV5 (Bill Thalmann mods) pre-amp; Sound Dynamics RTS 9 speakers, Linn Lingo turntable with Dynavector 10X4 cartridge, Thorens TD 147 turntable with Audio Technica AT33 mono cartridge, Marantz SA8001 CD player and a Yamaha T85 tuner. Break in period observations: the amplifier did not ever get hot to touch throughout the burn in period. I could place my hand on the top and touch the cooling fins without any problems. A 40 watt light bulb gets hotter to touch than the amp. When the amp was first on for an hour and listening to the tuner, I could tell the sound was clean, dynamic and in control with orchestral music. The floor noise was clean. As time passed, at 50 hours I could hear a change in the soundstage getting wider and going outside the speakers with music I was familiar with. At 100 hours, using the same music, I felt the soundstage reached its potential and I could get a better sense of the front to back depth. I could easily hear the space of the recording venue. Likewise, it took the bass the same amount of time to sound its best in terms of detail and solidarity. I have found this with my tube amps when they haven’t been played for long periods of time. Yes, IMHO, break in is important before judging an amp. Impressions: after 150 hours of break in, I found this amp to be dynamic, able to resolve musical details and was in control of the music at all listening levels. Complex passages and the many instrumental soloists playing at the same time found in Decca’s Gerhard ”The Plague” by Antal Doriti or London’s ”Messiaen” by Antal Dorati proved to be no problem for this amp. Individual instruments were easily heard and no smearing of the instruments was evident. It was easy to hear a soloist in a choir as the choir harmonized in the background (evident in the soundtrack ”Glory” with the Harlem Boy’s choir). You can hear cello soloists breathing and in the case of Glenn Gould, hear his humming as he played the piano (sometimes annoyingly). Microdynamics are good when going from a soft to loud passages. Musical lines are easy to hear. The only area I found not as pleasing as my trusty ST 35 tube amp was getting the nth degree of musicality in the midrange. This is not a criticism, but maybe a bias. What I mean is that on unamplified music like Yo Yo Ma playing his cello or a violinist like Heifetz, I can hear and in a physical sense the bowing of the strings as they play. On piano music or hearing drum cymbals, the decay of the notes is more pleasing to my ear and realistic on a tube amp. The QC-280 gets to 90% of what I sense and enjoy. Is it more correct?, I don’t know. But with the bass, there is no comparison. This amp brings a solidarity in the bass foundation that I have never heard. There is detail and a ”correctness” of how it presents itself. It is my speaker that is the limitation as it only goes down to 35 Hz. Drum whacks are realistic and quick. No boomy bass here. My last point is that regardless of the listening level, this amplifier controls the music, whether it a singer and a guitar or a 100 piece orchestra. Usually when you play music loud (which I seldom do), it just breaks up and gets distorted. Not this amp. In closing, this amp has the ’WOW’ factor. What I mean is when you are playing the stereo system and listening from a different room and either I or a friend says ”Wow, that really sounds good”, the amp has done its job. Jim, a job well done and a true bargain for having done this under $1,000 to boot. This isn’t my Hafler XL280. Thanks (and I’m sorry I babbled on too much.) John H. Jim,I wanted to tell you your work is impeccable and nice to see those skills of yours. Thanks so much for all of your help. When I get customers wanting there Haflers upgraded, your the man and I’ll send them to you.Thanks again,Alan Jim and Ed ,First thing, Thank You for a great design Ed, and Jim your expert work and grand service. The sound emitted from this upgrade is truly noticeable first track !! The clarity jumps front and center! Taj Mahal honestly could have been just across the room, so much “like you are there!” experience. I am just amazed how the instruments from front to back are clear, clean with no drop off for background passages, crisp not muddled. Silent passages are just that, dead silence, that stood out. The openness of the sound this puts out is truly a joy to experience! Seems even better as days go by😃. After listening to full compliment of Pink Floyd “Wish You Were Here”, I felt like my lower jaw needed pushed back up!!! That pretty well sums it up there!!!! Could not be happier, Thank You both , Rob Jim, I’m writing to let you know that my new preamp reveals a lot of difference with the Hafler upgrades. It’s an Apt Holman that has new capacitors courtesy of another fine Ebay seller. So in addition to testifying to your excellent service and all your help with my Hafler rebuild, I can now talk about the great sound – because I hear it. Your build of the PC-1 boards, combined with new filter capacitors from Qua-Co, made a major musical improvement in the sound of my Hafler DH-200, which dates from the very first year of that amp’s production. To gauge the difference, I made recordings of several favorite pieces before and after the PC-1 upgrade: Bob Marley’s Coming in from the Cold on vinyl, Bill Evans’ My Romance at the Village Vanguard on Spotify’s high quality setting and a track from the Heath Brothers’ Family Jazz CD with both an extended bass melody line and a wonderful piano solo. All are well recorded. I used Audacity and a Blue Snowball USB mic. The difference, in a word, was definition – more of it. On low frequencies, the upgrade produced sweeter, clearer, crisper sound and tempered the lush, resonant and boomy qualities that existed before. All the richness remained, but the accuracy and detail improved and the sound became more spacious, less cluttered. Piano notes sound like wound steel strings vibrating and are more clearly distinguishable from notes in the same octave played on the upright bass. The middle- and upper-range tones gained similar clarity and precision. Like dead grass was raked from the lawn. The differences also are visible in the track waveforms in Audacity. These subtle changes are audible with careful listening, but they also build up when playing music casually in the background. After even a few minutes, I find myself saying, simply, ”Wow. That *really* sounds good.” I have been an audio enthusiast for 40+ years. This amp is fantastic. Now, about those speakers….I am sure a lot more detail will appear when those get upgraded next. Your clear instructions, illustrations and responses to questions allowed me to install and correctly bias with confidence. It was a fun project with great results. Thanks, Jim! Al Hello Jim:The amp arrived yesterday about 7 pm without mishap. I waited about 30 minutes to let it warm up before I played a cd. Needless to say, I was in a state of expectation as to what I was going to hear after reading all the glowing reviews. To reiterate what speakers I am using, they are the Polk SDA-SRS 1.2TL, their flagship model, 12 speakers in each and weighing 180 pounds each. Their frequency response is 20 to 20,000Hz. So the music I was hearing with them before the upgrade was impressive. Settling down in my listening chair, I started a cd. My initial impression was not that startling. The piece that I was playing did not sound much different than when played through the Hafler SE240 that I was using as an interim amp. That initial impression was soon to change as I played another cd, and another, and so on until the realization came that the sound from symphony orchestras and from electronic music had no harshness or distortion in certain passages, where there was before the upgrade. The cymbals, chimes and bells were crystal clear. The deep bass notes could be felt in your body without any aural harshness. In fact, some pieces that I had previously marked as good but not worth listening to before the upgrade took on new life and were a pleasure to listen to. I listened to one piece after another until it became late and it was time to retire. So, to summarize, the impression of what I was hearing with this upgrade was a richness, or fullness in sound with no perceivable distortion or flatness, an improvement in stereo separation, with improved clarity at the far points, as well as the ability to hear the sound of instruments in the background move to the forefront with presence and clarity where I could barely hear them before. My listening pleasure has just been taken to a new level. I don’t know if what I now hear can be improved on to any extent, since I now think I have reached perfection. I would recommend this upgrade without any hesitation to anyone wanting to enhance their listening pleasure. You won’t be disappointed. Thanks Jim, for the great and passionate work you do to enhance the listening pleasure of music lovers and to Ed for the brilliant QC upgrade. The updates and photos of the work as you were performing it also kept me involved in the process. Thanks again for opening a new adventure in listening pleasure.Best regards, Kurt Jim, The amp arrived Wednesday with no damage. Unboxed and plugged it in last night and took it for a test drive. Unbelievable! This is THE sound that I thought I could never afford. I bought the Klipsch speakers a few years ago and was not overly impressed with them. They had deep bass but lacked punch (and the highs were a little harsh). That was apparently an amp issue and not a speaker issue. My apologies to Klipsch (I know there are plenty of Klipsch c
Frequently Asked Questions About HAFLER DH220, DH500 (PC19 or PC10) POLYPROPYLENE CAP UPGRADE KIT & INSTALLATION in My Website
www.malmobeerweek.se is the best online shopping platform where you can buy HAFLER DH220, DH500 (PC19 or PC10) POLYPROPYLENE CAP UPGRADE KIT & INSTALLATION from renowned brand(s). www.malmobeerweek.se delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.
What are the best-selling HAFLER DH220, DH500 (PC19 or PC10) POLYPROPYLENE CAP UPGRADE KIT & INSTALLATION on www.malmobeerweek.se?
www.malmobeerweek.se helps you to shop online and delivers Richard Mille to your doorstep. The best-selling Richard Mille on www.malmobeerweek.se are: Milesi, Ogier, Wadoux Hand Signed Le Mans Promo Card Richard Mille 2022 Sapphire Crystal for Richard Mille RM002 Automatic AR Coating Watch Glass 5 SPOKE PREMIUM SCREW FITS FOR RICHARD MILLE RM11 RM04 RM055 RM35 RM58 RM061 AR Coating Watch Sapphire Crystal Glass for Richard Mille RM016 33.8*30.0*2.11mm richard mille Montre vintage RICHARD MILLE annonce imprimée!!”Montre Belle et Classe ” 4/5 Spokes Star Head Tip Stainless Steel Screwdriver for Richard Mille Watch E Watch Repair Screwdriver+4Pcs Pin Tip Kit For RM Richard Mille Watch Repair Tool Richard Mille Red Rubber Strap for rm 39-01 (INNOVSHELL) Anti-Scratch Film for RICHARD MILLE RM 72-01 New Vagenari Rubber Crown for Richard Mille RM055 RM011 RM010 RM061 Authentic Richard Mille RM Watch Storage Box Case Replacement Glass Dial Fits Richard Mille RM005 New Watch Band Replacement Rubber Strap Fits Richard Mille RM11-03 RM65 RM47 Sapphire Watch Crystal for Richard Mille RM023 Automatic AR Coating Watch Glass 3 4 5 Spoke Star Strap Band Case Screwdriver For Richard Mille Watch Repair Tool Watch Repairing Screwdriver With Different Tips For RM Richard Mille Watch 22 MM Black Rubber Silicone Strap Band Soft Vintage Replacement Diver Sport Steel Watch Repairing Screwdriver+4 Tips For RM Richard Mille Watch Repair Tool Red Steel 3 4 5 Spokes Star Screwdriver For Richard Mille Watch Repair Tool 4 and 5 Spokes Star Head Tip Screwdriver Tool for Richard Mille Watch Strap Band Watch Repair Screwdriver With Different Tips For RM Richard Mille Watch Repair k 25mm Spring Bar For RICHARD MILLE RM011 RM-11 Watch Silicon Band Strap 4 and 5 Spokes Star Head Tip Screwdriver Tool for Richard Mille Watch Strap Band Richard Mille RM011 RM11-03 RM65-01 RUBBER STRAP MEDIUM Richard Mille RM 1103 Rose Gold & Titanium Automatic Flyback Chronograph Watch Genuine Richard Mille Automatic Watch Winder Box PARTS OR REPAIR original Richard Mille Authentic RM 11 N RM-011 Black Leather Watch Strap NEW Watch Screwdriver Repair Tool With 1.2/2.35/2.75mm Tips For RM Richard Mille Rubber Watch Crown Ring for RM Richard Mille RM07 Ladys’ Watch 4 and 5 Spokes Star Head Tip Screwdriver Tool for Richard Mille Watch Strap Band 1:18 Spark Oreca 07 Gibson Richard Mille Racing Team 24h Le Mans 2022 #1 Wadoux 4 and 5 Spokes Star Head Tip Screwdriver Tool for Richard Mille Watch Strap Band Poster A4 HUBLOT, RICHARD MILLE, BRM, TAG HEUER MONACO, BELL ROSS, JACOB & CO, U High quality stainless steel watch buckle folding clasp 20mm fits Richard Mille Richard Mille (2nd Edition): Lincarnation dun style by COLLECTIF 18 20mm Stainless Steel Watch Buckle Clasp Fits Richard Mille RM Bracelet Silver Richard Mille RM30 RM35 BLACK RUBBER STRAP MEDIUM Red Steel 3/4/5 Spokes Star Screwdriver Repair Fix Tool For Richard Mille Watch watch crown rubber for Richard Mille RM032 Flyback Diver 50mm Chronograph watch Matte Titanium Watch Band 4 Prong Screw Fits Richard Mille RM 011 030 035 055 ADVERTISING: Richard MILLE RM 055 Bubba Watson Dubail 2014 Watches 8 Branch Bezel RM Screw for Richard Mille RM025 RM028 RM032 Watch Case #4 Authentic Richard Mille Travel Watch Case RM Pouch Pocket Box LE MANS CLASSIC 23 JULY 2004 PARIS FRANCE RICHARD MILLE POSTER ADVERT A4 FILE 23 8 -26 MM Spring Bar Pins Fit for Most Watch Case Alligator Leather Bracelet RICHARD MILLE CALIBER RM 037 FINE WATCH VTG 2016 ADVERTISEMENT Richard Mille watch print ad 2019 watch resting on rosebud Richard Mille 3 Watch Travel Case Box Oscar Maschera Italy Richard Mille Leather Box 10x7x4″ Brown Leather Case Tray RM028 Titanium Diver 47mm Openworked Dial 25mm * 20mm White Rubber Band Strap for RM RICHARD MILLE RM011 RM50-03/01 RICHARD MILLE WATCH MAGAZINE promo ad #24 2015 ”NOT A WATCH” 2 PGS AD Brand New Richard Mille RM11-03M Yellow rubber strap size M 5 Spokes Star Silver Screwdriver 2.75 Header Tool For Richard Mille Watch Case RICHARD MILLE WATCH MAGAZINE promo ad #23 2014 ”NOT A WATCH” 2 PGS AD 1 1.5 2.3 2.5 2.8mm Screwdriver Watch Removal for Richard Mille 4 5 8 Claws RICHARD MILLE WATCH MAGAZINE promo ad #28 ”NOT A WATCH” 4 PGS AD Steel Screwdriver Set with Different Tips Repair Tool for RM Richard Mille Watch 4&5 Spokes Star Head Screwdriver Tool for Richard Mille Watch Strap Band Case Richard Mille watch display case (very rare) Red Steel 3/4/5 Spokes Star Screwdriver Repair Fix Tool For Richard Mille Watch Watch Repair Fix Tool Screwdriver 5 PRONGS 2.3mm For Richard Mille RM 5490 International Watch Magazine August 2007 / Richard Mille, Patek Philippe ADS NEAR MINT Genuine Richard Mille RM011 Yellow Rubber Watch Band Size M From JAPAN 20mm Stainless Steel Watch Buckle Clasp For Richard Mille RM Bracelet Silver Waterproof White Canvas Strap With Rubber Coating Fits Richard Mille RM030 RM035 McLAREN HONDA x RICHARD MILLE Jacket with Shinji Nakano Autograph and Cap Rare RICHARD MILLE WATCH MAGAZINE promo ad #31 ”NOT A WATCH” 4 PGS AD Steel Screwdriver Set with Different Tips Repair Tool for RM Richard Mille Watch Red Steel 3/4/5 Spokes Star Screwdriver Repair Fix Tool For Richard Mille Watch RICHARD MILLE WATCH MAGAZINE promo ad #29 ”NOT A WATCH” 4 PGS AD 4/5 Prongs Screwdriver for Richard Mille Watch Bezel/Case Back Screw Tools 25mm Rubber Strap 20mm Steel Folding Clasp for RICHARD MILLE RM011 RM50-03/01 Green Glass Magnifier Watch Jewelry Repair Tools Loupe Lens Diver Fits for Times RICHARD MILLE WATCH MAGAZINE promo ad #30 ”NOT A WATCH” 4 PGS AD 25MM Nylon Watchband For Richard Mille RM011 RM3502 RM056 Waterproof Strap Tool Watch Repair Screwdriver With Different Tips For RM Richard Mille Watch Repair k New 2.7mm Stainless Steel 5 Prongs Screw Driver Tool for Richard Mille Watch 1.1mm 5 prongs screwdriver for Richard Mille watch movement/mechanism screw tool 22mm Blue Silicone Rubber Watch Strap Band Deployment Buckle Waterproof Belt NEW Richard Mille Watch Strap Fits RM30 M YELLOW OEM RM35-01 RM35-02 RM55 RM30 Richard Mille travel clutch with dust bag BROWN FULL GRAIN LEATHER Richard Mille Technical Specification For RM 023 Authentic Richard Mille RM11 Medium Black Strap – Box Sold Separate Richard Mille RM011 Felipe Massa Edition 18kt White Gold Annual Calendar 25mm * 20mm Baby Blue Rubber Band Strap for RM RICHARD MILLE RM011 RM50-03/01 Richard Mille 18K Rose Gold Diamond Black NTPT Ref RM037 Nylon Watchband Fit For Richard Mille RM011 RM3502 RM056 Canvas Watch Bracelet Richard Mille Genuine RM032 Rubber Belt Red Very Good Condition Ship From Japan Fluorine Rubber Five Star Crown Ring Fits Richard Mille RM011 RM055 RM059 RM035 RICHARD MILLE 11N 08 BROWN ALLIGATOR LEATHER WATCH STRAP 4&5 Spokes Stars Head Tips Screwdriver Kit For Richard Mille Watch Strap Band f RICHARD MILLE WATCH MAGAZINE promo ad #32 ”NOT A WATCH” 4 PGS AD Richard Mille RM033 Extra Flat Rose Gold Rubber Strap 46mm RM033-AD-RG Full Set 25*20mm Nylon Canvas Stitched Watchband For Richard MILLE Screw Down Connections F6730 Watch Repair screwdriver Tool for RM Richard Mille 4/5 prong screws Original 2 Page Print Ad Richard Mille A Racing Machine On The Wrist Nice Color RICHARD MILLE genuine watch box case Outer box Color Gray Mobile case Watch Case Back Sapphire Crystal Glass for Richard Mille RM07-01 27.7mm Domed Mens Pullover Fleece Hoodie