ESX SXB BMW Speaker & DSP amp upgrade Tier 4 BMW 2 series F22

$1143.06 Buy It Now or Best Offer
free,30-Day Returns

Seller Store allwoodsaudio
(4886) 99.9%,

Location: Delves Lane
Ships to: US,
Item: 234740095766

Return postage will be paid by:Buyer
Returns Accepted:Returns Accepted
After receiving the item, your buyer should cancel the purchase within:30 days
ESX:ESX
Compatible Vehicle Make:BMW
System Includes:Speakers,Subwoofer,Amplifier,Crossover,Cables
Custom Bundle:Yes
Manufacturer Part Number:SXB DSP
M6:M6
Country/Region of Manufacture:Germany
Channels:6 ch
Power:Less than 1000 W
Compatible Vehicle Model:1.1,2,3,4,5
Colour:Black

ESX BMW Speaker Upgrade 3 way components SXB8.3C with 6CH DSP amplifier These are specifically designed to work with BMW Base audio , if unsure send us your full vin and we can confirm For the base audio you will need tweeter pods to fit the tweeter in this kit , these can be purchased from bmw directly or on ebay This kit will split the subs from the doors to give better than HK level performance and you can tune it to your liking with over 1000 settings SIGNUM SXB LOUDSPEAKERS FOR BMW/MINI Retrofit speakers for many BMW and Mini models at an affordable price? And this in a very good quality? The SIGNUM SXB loudspeaker systems prove that this does not have to be a contradiction. If the original factory sound system simply sounds too thin, these models are spot on. Brilliant highs, balanced mids and powerful bass are the rewarding results. Everyone knows that it is not easy to retrofit good loudspeakers in BMW vehicles. For this reason, ESX has developed all components in such a way that this ”hurdle” is easier to take. Through consistent plug + play implementation, it is quite easy to replace the original speakers without any problems. All connectors, screws and the speakers themselves fit perfectly. SXB8.3C 3-Way Component System SXB4.2C 10 cm (4”) 2-Way Component System Power Rating 60/120 Watts RMS/max. Impedance 4 Ohms, Frequency Range 75 – 22.0000 Hz 100 mm Midrange with Paper Cone N42 Neodymium Magnet Driver 2-Way Crossover incl. Cable 25 mm Silk Dome Neodymium Tweeter Car-specific Connectors Midrange: Installation Depth 30 mm, Installation Opening 98 mm Tweeter: Installation Depth 10 mm, Installation Opening 41 mm SXB8W 20 cm (8”) Subwoofer (Pair) Power Rating 100/200 Watts RMS/max. Impedance 4 Ohms, Frequency Range 30 – 300 Hz 216 mm Paper Cone 38,5 mm Voice Coil, Nomex Spider N38 Neodymium Magnet Driver Car-specific Connector Installation Depth: 51 mm, Installation Opening: 180 mm Fits into: Many BMW F/G and MINI R/F Models The M6 model can surely be seen as a new milestone in amplifier construction. It is barely imaginable that a fully grown class D amplifier works in this small housing, featuring six pairwise bridgeable outputs, each with 105 watts RMS per channel (at 2 Ω). A total of 630 Watts RMS are available. The compact dimensions are made possible by an elaborate 4-fold laminated board, which also effectively suppresses EMC interference due to the favorable topology – a must, especially for full-range Class D amplifiers. The centerpiece is the state-of-the-art DSP chip ADAU1452 from Analog Devices, which was fine-tuned by the engineers and leaves no audiophile wishes unfulfilled. The amplifier finds its connection via a space-saving cable harness with ISO plugs, individual Plug+Play cable sets are also available. Useful additional features include soft-clipping to protect the electronics and speakers in 2 Ω operation and the newly developed high-level input with Error Protection System. When connected to an OEM factory radio the Error Protection System ensures that no functions are impaired or error messages are written into the vehicle memory. • Intelligent High Level Input (Error Protection System) • Start-Stop ready, Auto Turn-On • Burr-Brown converters (PCM3168A) and Analog Devices DSP (ADAU1452) • Dual 32bit, 330 MHz DSP technology, controllable via new V3 PC software or V3 App • Soft-Clipping (power attenuation) in 2 Ohm operation • Signal-to-noise Ratio ≥90dB • Frequency Response 15 Hz – 22 kHz (-3dB) • THD ≤0,1% (1 kHz, 4Ω, 90% Power) • Separately controllable input sensitivity (Channel 1-4, Channel 5-6), Clipping LEDs • Plug+Play with vehicle-specific cable sets • External Bluetooth® USB-Dongles (BTS & BTA2) for Audio Streaming & App Control (optional) • Digital remote control (DRC1) with OLED display for controlling various DSP functions (optional) • QUICK CONNECT Terminal to connect all ESX 2 + 2 Ohms Subwoofer-Systems V3 EDITION New Processor, PC-Software & App M6 6-CHANNEL CLASS D AMPLIFIER WITH 8-CHANNELL DSP · 630 WATTS RMS 6 x 70/105 Watts RMS @ 4/2 Ohms or 3 x 210 Watts RMS @ 4 Ohms bridged 6 x High Level Input 4,8 – 20 V RMS 6 x RCA Low Level Input* (RCA) 2 – 6 V RMS 1 x AUX Input/Stereo (RCA) 2 – 6 V RMS 1 x Optical Input/Stereo (PCM, 96 kHz / 24 bit) 6 x Loudspeaker Output amplified 2 x Pre-Amplifier Output (RCA) 4 V RMS (configurable via DSP) Dimensions: 150 x 44 x 220 mm

Frequently Asked Questions About ESX SXB BMW Speaker & DSP amp upgrade Tier 4 BMW 2 series F22 in My Website

www.malmobeerweek.se is the best online shopping platform where you can buy ESX SXB BMW Speaker & DSP amp upgrade Tier 4 BMW 2 series F22 from renowned brand(s). www.malmobeerweek.se delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling ESX SXB BMW Speaker & DSP amp upgrade Tier 4 BMW 2 series F22 on www.malmobeerweek.se?