BMX Seat Clamp M8 Bolt, Washer, Nut, fits GT PRO PERFORMER GT PRO FREESTYLE TOUR

$8.76 Buy It Now or Best Offer
free,30-Day Returns

Seller Store djshantec
(427) 100.0%,

Location: Portsmouth, New Hampshire
Ships to: US,
Item: 265165241339

All returns accepted:ReturnsNotAccepted
Y.F.S:Y.F.S
Type:Saddles, Seats
Color:Black
TOUR:TOUR
For Bike Type:BMX Bike
Vintage:Yes

Here we have a single brand new M8 x 1.25 @ 25mm (6mm Allen) bolt paired with a difficult to find washer and low profile matching nut. The nut included with each bolt fits in the 12mm recess common to many vintage BMX seat post clamps. This is NOT original hardware from the era, but is nearly as identical as you can find with the exception of a Y.F.S 12.9 stamping on the head face of the bolt (shown in the 87 pink white wings pic). Parts are steel alloy and treated with a black oxide finish like the originals. This is the solution for janky, lost, missing, rusty, stolen, or stripped out hardware. If your seat clamp was freshly powder coated this setup will make it pop like new! See fitment below for helpful restoration info! Do you have a 1987 GT Clamp? START HERE! PLEASE READ this important sizing and fitment info below before ordering! 1987 models MAY require a smaller 1/4″ x 20 bolt size. IF You have a 1987 clamp: PLEASE measure your existing clamp bolt’s dimensions to help us make sure 100% that you order the correct size! IF you have the smaller, less common 1987 CLAMP: We have the smaller size for these obscure clamp 1987 models available here!BMX Seat Clamp Bolt & Nut 1/4″ x 20, GT PRO FREESTYLE TOUR SMALLER BOLT SIZE Ebay Item #: 265288087356 Important ”M8” Sizing Notes This hardware is custom fabricated as a direct fit for most 1980s GT BMX models such as the Pro Freestyle Tour Team, GT Vertigo, and GT Performer. Check the photos for example GT clamps that are known to fit the standard M8 size. Important ”M8” Fitment Notes 1987 white wing clamps on higher end models in the picture can be a problematic fit. For some reason, GT’s seat clamp supplier for the 87 models were not only split between two different bolt diameter sizes but also suffered from poor quality machining. Therefore, 87 clamps MAY require enlarging the bolt head recess with barrel sander or round file. If you’re restoring one of these clamps, it’s best to make any modifications to fit this bolt before powdercoat/refinishing. If you’re making modifications to an existing clamp, use plenty of blue tape to help prevent damage to the finish and prevent excessive chipping. Even after some careful modifications, a original 87 white wing clamp is still a tight fit due to the hole not being machined perfectly round and the original bolt head size tolerance (12.73mm vs 12.9mm), you can measure a working existing bolt. This MAY also fit any other brand’s BMX seat clamps. The best way to confirm which size YOU need is to measure your clamp twice using a set of calipers or a ruler, then order once. Please be aware and compare your measurements with the pictures to make sure this size will fit your application. 1986, 1987, 1988 GT Seat clamps in pictures are for reference only and are not included!

Frequently Asked Questions About BMX Seat Clamp M8 Bolt, Washer, Nut, fits GT PRO PERFORMER GT PRO FREESTYLE TOUR in My Website

www.malmobeerweek.se is the best online shopping platform where you can buy BMX Seat Clamp M8 Bolt, Washer, Nut, fits GT PRO PERFORMER GT PRO FREESTYLE TOUR from renowned brand(s). www.malmobeerweek.se delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling BMX Seat Clamp M8 Bolt, Washer, Nut, fits GT PRO PERFORMER GT PRO FREESTYLE TOUR on www.malmobeerweek.se?