4 inch Lift Spindles w/ 1.25" Rotor For Chevrolet GMC C1500 2WD 5 Lug 1988-1998

4 inch Lift Spindles w/ 1.25

$175.95 Buy It Now or Best Offer
free,30-Day Returns

Seller Store
() %,

Location: Ontario, California, United States
Ships to: US,
Item: 155720679713

Condition:New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is … Read moreabout the conditionNew: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller’s listing for full details. See all condition definitionsopens in a new window or tab
Manufacturer Part Number:LEA176084DER
autoparts-leader:autoparts-leader
UPC:Does not apply
Package Included:2X Drop Spindles
Lift Height:4 inch
Drive Type:2WD Only
Adjustable:No
Placement on Vehicle:Front, Left, Right
Part Type:Suspension Lift Kit
Fitment Type:Direct Replacement
Warranty:1 Year
Package Diameter:21.26*12.99*12.4 in.
Package Weight:47.84 Lbs
Superseded Part Number:1988-1998 Chevrolet C1500 (1/2 Ton, Ext Cab) 5 Lug Only
Interchange Part Number:1988-1998 Chevrolet C2500 (3/4 Ton All Cabs 6 Lug)
Other Part Number:92-99 Suburban C1500 1/2 Ton 5 LUG ONLY; C2500 3/4 Ton 6 LUG ONLY
Ship from:Ontario, California
Note:Does NOT Fit 88-91 C1500 STANDARD CAB with 1″ thick brake rotors
Instruction Manual Included:No
Installation Hardware Included:No
Material:Steel

eBay Fitment 1988-1998 Chevrolet C1500 (1988-1991 Extended Cab Only; 1/2 Ton, FITS 5 LUG ONLY!!! Fits 1.25″ thick Rotors ONLY! ) 1992-1998 Chevrolet C1500 Suburban 1/2 Ton; FITS 5 LUG ONLY!!! 1988-1998 Chevrolet C2500 3/4 Ton; FITS 6 LUG ONLY!!! 1992-1999 Chevrolet C2500 Suburban 3/4 Ton; FITS 6 LUG ONLY!!! 1995-1999 Chevrolet Tahoe 1988-1998 GMC C1500 (1988-1991 Extended Cab Only; 1/2 Ton, FITS 5 LUG ONLY!!! Fits 1.25″ thick Rotors ONLY! ) 1992-1998 GMC C1500 Suburban 1/2 Ton; FITS 5 LUG ONLY!!! 1988-1998 GMC C2500 3/4 Ton; FITS 6 LUG ONLY!!! 1992-1999 GMC C2500 Suburban 3/4 Ton; FITS 6 LUG ONLY!!! 1995-1999 GMC Yukon 4 inch Lift Spindles w/ 1.25″ Rotor For Chevrolet GMC C1500 2WD 5 Lug 1988-1998 Fitment 1988-1998 Chevrolet C1500 (1988-1991 Extended Cab Only; 1/2 Ton, FITS 5 LUG ONLY!!! Fits 1.25″ thick Rotors ONLY! ) 1992-1998 Chevrolet C1500 Suburban 1/2 Ton; FITS 5 LUG ONLY!!! 1988-1998 Chevrolet C2500 3/4 Ton; FITS 6 LUG ONLY!!! 1992-1999 Chevrolet C2500 Suburban 3/4 Ton; FITS 6 LUG ONLY!!! 1995-1999 Chevrolet Tahoe 1988-1998 GMC C1500 (1988-1991 Extended Cab Only; 1/2 Ton, FITS 5 LUG ONLY!!! Fits 1.25″ thick Rotors ONLY! ) 1992-1998 GMC C1500 Suburban 1/2 Ton; FITS 5 LUG ONLY!!! 1988-1998 GMC C2500 3/4 Ton; FITS 6 LUG ONLY!!! 1992-1999 GMC C2500 Suburban 3/4 Ton; FITS 6 LUG ONLY!!! 1995-1999 GMC Yukon Please note -These Lift spindles / Knuckles fit for 2WD ONLY -Does NOT Fit 1988-1991 C1500 STANDARD CAB with 1″ thick brake rotors!!! -Increases Track Width by approx. 1″ per side. -Fits vehicles with 1.25″ thick rotors ONLY! Does NOT fit models with 1″ thick brake rotors. These are the approximate OEM sizes. Package Includes 2X 4” Lift Spindles (as pictures show) Installation 1.The first step we took was to remove the negative terminal on the battery, lift the vehicle up, and remove the front tires. We began by removing the brake caliper from the stock spindle along with the corresponding hardware that connects the factory brake lines to the spindle. Take caution when doing this and do not let the caliper hang by the brake line – doing so could severely damage your brake line so be sure to attach the caliper to the frame rail out of the way. 2.From there, we proceeded to remove the ABS speed sending wire along with the nuts securing the tie rod, upper ball joint, and lower ball joint. With the nuts removed, the spindle should be able to be removed carefully by pulling it downward. Depending on how old your vehicle is or how rusty it is, you may need to use some penetrating oil one each of the two ball joints and the tie rod in order to get it to break free. If your application requires this, be careful because when the spindle breaks free, it literally falls off the truck, so be prepared and take caution. 3.Once the spindle is off the vehicle, we removed the three bolts securing the wheel bearing assembly to the spindle. Take note of the direction of the factory dust shield and hub assembly as you install it onto the new spindle as it needs to go on exactly as it came off. We then secured the three bolts with thread lock and torqued them. 4.Now that the hub assembly is complete and not yet on the vehicle, this was a great time to check the condition of the Silverado’s ball joints. We visually inspected their dust boots to ensure there weren’t any cuts, and applied some pressure to them to make sure there wasn’t any play. Once they checked out, it was time to reinstall everything in reverse order of the way it came off. 5.With the hub assembly installed on the spindle, we lifted the completed spindle onto the truck’s suspension and attached the lower control arm and upper control arm to the spindle using the stock hardware. The lower control arm’s ball joint nut needs to be torqued to 70 ft-lbs and the upper control arm’s ball joint nut needs to be torqued to 30 ft-lbs. 6.With the new spindle mounted on the truck, we reinstalled the brake rotor, caliper, and wheel speed sensor, torquing the caliper bolts to 100 ft-lbs. 7.The first side of the spindle installation was now complete and as such, it was now time to repeat the process on the other side of the truck. Once both sides were installed, we did a quick once over to double check our work and then remounted the tires and wheels back onto the vehicle and lowered it back down to the shop’s floor. Item Specifics Condition New Manufacturer Part Number LEA176084DER Brand autoparts-leader Package Included 2X Drop Spindles Lift Height 4 inch Drive Type 2WD Only Adjustable No Placement on Vehicle Front Part Type Suspension Lift Kit Fitment Type Direct Replacement Warranty 1 Year Package Diameter 21.26*12.99*12.4 in. Package Weight 47.84 Lbs Superseded Part Number 1988-1998 Chevrolet C1500 (1/2 Ton, Ext Cab) 5 Lug Only Interchange Part Number 1988-1998 Chevrolet C2500 (3/4 Ton All Cabs 6 Lug) Other Part Number 92-99 Suburban C1500 1/2 Ton 5 LUG ONLY; C2500 3/4 Ton 6 LUG ONLY Ship from Ontario, California Note Does NOT Fit 88-91 C1500 STANDARD CAB with 1″ thick brake rotors Instruction Manual Included No Installation Hardware Included No Material Steel Item Specifics Condition New Manufacturer Part Number LEA176084DER Brand autoparts-leader Package Included 2X Drop Spindles Lift Height 4 inch Drive Type 2WD Only Adjustable No Placement on Vehicle Front Part Type Suspension Lift Kit Fitment Type Direct Replacement Warranty 1 Year Package Diameter 21.26*12.99*12.4 in. Package Weight 47.84 Lbs Superseded Part Number 1988-1998 Chevrolet C1500 (1/2 Ton, Ext Cab) 5 Lug Only Interchange Part Number 1988-1998 Chevrolet C2500 (3/4 Ton All Cabs 6 Lug) Other Part Number 92-99 Suburban C1500 1/2 Ton 5 LUG ONLY; C2500 3/4 Ton 6 LUG ONLY Ship from Ontario, California Note Does NOT Fit 88-91 C1500 STANDARD CAB with 1″ thick brake rotors Instruction Manual Included No Installation Hardware Included No Material Steel WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov. 1.We only accept PayPal. 2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages. 3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.) 4.Payment must be received within 10 days as auction ended or order might be delayed. 1.We only accept PayPal. 2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages. 3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.) 4.Payment must be received within 10 days as auction ended or order might be delayed.1.We only accept PayPal. 2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages. 3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.) 4.Payment must be received within 10 days as auction ended or order might be delayed. 1. Orders processed within 24 hours of payment verification. 2. We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address. 3. The images shown are not the actual item and are for your reference only. 4. Fast shipping:All our packages use USPS First Class/UPS/Fedex…. Package Service 5. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction! 1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS! 2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable. 3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement. 4. Return shipping is to be paid by the Buyer. We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns. STORE HOME ABOUT US FEEDBACK SHIPPING PAYMENT New List Item 4X 1.5″ Wheel Spacers 5×100 12×1.5 For Chevy Cavalier Chrysler LeBaron Sebring USD 76.98 4X 1.5″ Hubcentric Wheel Spacers 5×4.75 For 2010-2017 Chevy Equinox GMC Terrain USD 88.98 4X 3″ Thick Wheel Spacers 8×6.5 9/16″-18 For Ford F250 F350 Dodge Ram 2500 3500 USD 159.98 Car Roof Racks Luggage Rails Crossbar Carrier Set For 2019-2023 Honda Passport USD 89.19 4X 25mm Thick Wheel Spacers 5×4.5 12×1.25 For Nissan Sentra Pathfinder Maxima USD 63.98 Hot Item 2 Front Hood Gas Lift Supports Shock Struts Props For Ford Explorer 2002 to 2010 USD 12.73 Starter For Ford F150 4.6 5.4 1999-2010 F250 1999-2009 6646 SFD0024 6C3T-11000BA USD 47.49 Starter For Polaris & Drive 300 Big Boss 250 Scrambler Sportsman 400 3085393 USD 52.99 Starter For Chevy 2.2L S10 02 03 Monte Carlo 3.4L Venture Impala 2001-05 SDR0189 USD 45.49 New Starter For Ford Mercury Crown Victoria Lincoln Mark Series 4.6L SFD0028 USD 45.49 Shop Category Store Home Oxygen Sensor UTV & ATV Brake System Parts ▷ Brake Pads ♢ Kevlar Carbon Brake Pads ♢ Sintered Brake Pads ◈ Brake Shoes Starter lift supports Alternators Wheel Spacers leveling lift kit Towing Mirrors Wheel hub bearing Wheel lug nut AC Compressor Radiator Mass-Air-Flow Sensor CV axle Fuel injectors Cylinder Head Gasket Sets Cylinder Piston Gasket Sets Shocks & Struts Air Suspension Complete Strut Brake Rotors & Pads ◈ Brake rotors ◈ Brake Pads ◈ Brake Rotors Pads Kit Aotomotive Tools Windshield Wiper Motor Timing Chain Kits Timing Belt Kits Water Pumps Door Lock Actuator Oil Pump Regulator Rectifier Oil Cooler Starter Relay Parking sensor Crankshaft Position Sensor Camshaft Position Sensor MAP Sensor Oil Pressure Sensor Throttle Position Sensor Stator Catalytic Converter idle air control valve blower motor fan Secondary Air Injection Pump Tire Pressure Gauge Steering Rack Vacuum Pump Spark Plug Ignition Wire Engine Mount Pressure Tester Gauge Wheel Lug Car Carburetor Height Level Sensor Temperature Sensor Driveshaft Door handle Oil Fuel Hose Line 4WD Actuator Throttle Body Thermostat Housing Fuel Injector Wiring Harness Brake pad sensor Sensor-8 transmission filter transmission kit Fuel Pumps 3rd Brake Light Tire Pressure Sensor ATV Brake Caliper Sun Visor Bumpers & Parts Tonneau Cover Spoiler Wing Front bumper lip Cylinder Piston Kit Coolant Tank Jeep Fender Flares jumper cable Roof Rack Window Visor ATV Tires Switch Panel ABS speed sensor Knock sensor vehicle speed sensor Car Cover Car Floor Mats Turbocharger Pillar Posts Fuse Holder Box Rear View Camera Rear Window Louver Cover winch Headlight Assembly Cold air intake kit Dash Cover Windshields battery Switch Air suspension valve solenoid wheel hub bearing knuckle Ignition coil Spindle Window Regulator steering knuckle-7 Jack Stands Bed Step Other 4 inch Lift Spindles w/ 1.25″ Rotor For Chevrolet GMC C1500 2WD 5 Lug 1988-1998 Fitment 1988-1998 Chevrolet C1500 (1988-1991 Extended Cab Only; 1/2 Ton, FITS 5 LUG ONLY!!! Fits 1.25″ thick Rotors ONLY! ) 1992-1998 Chevrolet C1500 Suburban 1/2 Ton; FITS 5 LUG ONLY!!! 1988-1998 Chevrolet C2500 3/4 Ton; FITS 6 LUG ONLY!!! 1992-1999 Chevrolet C2500 Suburban 3/4 Ton; FITS 6 LUG ONLY!!! 1995-1999 Chevrolet Tahoe 1988-1998 GMC C1500 (1988-1991 Extended Cab Only; 1/2 Ton, FITS 5 LUG ONLY!!! Fits 1.25″ thick Rotors ONLY! ) 1992-1998 GMC C1500 Suburban 1/2 Ton; FITS 5 LUG ONLY!!! 1988-1998 GMC C2500 3/4 Ton; FITS 6 LUG ONLY!!! 1992-1999 GMC C2500 Suburban 3/4 Ton; FITS 6 LUG ONLY!!! 1995-1999 GMC Yukon Please note -These Lift spindles / Knuckles fit for 2WD ONLY -Does NOT Fit 1988-1991 C1500 STANDARD CAB with 1″ thick brake rotors!!! -Increases Track Width by approx. 1″ per side. -Fits vehicles with 1.25″ thick rotors ONLY! Does NOT fit models with 1″ thick brake rotors. These are the approximate OEM sizes. Package Includes 2X 4” Lift Spindles (as pictures show) Installation 1.The first step we took was to remove the negative terminal on the battery, lift the vehicle up, and remove the front tires. We began by removing the brake caliper from the stock spindle along with the corresponding hardware that connects the factory brake lines to the spindle. Take caution when doing this and do not let the caliper hang by the brake line – doing so could severely damage your brake line so be sure to attach the caliper to the frame rail out of the way. 2.From there, we proceeded to remove the ABS speed sending wire along with the nuts securing the tie rod, upper ball joint, and lower ball joint. With the nuts removed, the spindle should be able to be removed carefully by pulling it downward. Depending on how old your vehicle is or how rusty it is, you may need to use some penetrating oil one each of the two ball joints and the tie rod in order to get it to break free. If your application requires this, be careful because when the spindle breaks free, it literally falls off the truck, so be prepared and take caution. 3.Once the spindle is off the vehicle, we removed the three bolts securing the wheel bearing assembly to the spindle. Take note of the direction of the factory dust shield and hub assembly as you install it onto the new spindle as it needs to go on exactly as it came off. We then secured the three bolts with thread lock and torqued them. 4.Now that the hub assembly is complete and not yet on the vehicle, this was a great time to check the condition of the Silverado’s ball joints. We visually inspected their dust boots to ensure there weren’t any cuts, and applied some pressure to them to make sure there wasn’t any play. Once they checked out, it was time to reinstall everything in reverse order of the way it came off. 5.With the hub assembly installed on the spindle, we lifted the completed spindle onto the truck’s suspension and attached the lower control arm and upper control arm to the spindle using the stock hardware. The lower control arm’s ball joint nut needs to be torqued to 70 ft-lbs and the upper control arm’s ball joint nut needs to be torqued to 30 ft-lbs. 6.With the new spindle mounted on the truck, we reinstalled the brake rotor, caliper, and wheel speed sensor, torquing the caliper bolts to 100 ft-lbs. 7.The first side of the spindle installation was now complete and as such, it was now time to repeat the process on the other side of the truck. Once both sides were installed, we did a quick once over to double check our work and then remounted the tires and wheels back onto the vehicle and lowered it back down to the shop’s floor. WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov. 1.We only accept PayPal. 2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages. 3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.) 4.Payment must be received within 10 days as auction ended or order might be delayed. 1.We only accept PayPal. 2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages. 3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.) 4.Payment must be received within 10 days as auction ended or order might be delayed.1.We only accept PayPal. 2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages. 3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.) 4.Payment must be received within 10 days as auction ended or order might be delayed. 1. Orders processed within 24 hours of payment verification. 2. We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address. 3. The images shown are not the actual item and are for your reference only. 4. Fast shipping:All our packages use USPS First Class/UPS/Fedex…. Package Service 5. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction! 1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS! 2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable. 3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement. 4. Return shipping is to be paid by the Buyer. We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns. Copyright of Top-liftsupport. All rights reserved.

Frequently Asked Questions About 4 inch Lift Spindles w/ 1.25″ Rotor For Chevrolet GMC C1500 2WD 5 Lug 1988-1998 in My Website

www.malmobeerweek.se is the best online shopping platform where you can buy 4 inch Lift Spindles w/ 1.25″ Rotor For Chevrolet GMC C1500 2WD 5 Lug 1988-1998 from renowned brand(s). www.malmobeerweek.se delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling 4 inch Lift Spindles w/ 1.25″ Rotor For Chevrolet GMC C1500 2WD 5 Lug 1988-1998 on www.malmobeerweek.se?